LG DVX9900 Unofficial Firmware by FallenAngel
http://dvx9900.altervista.org
USING THIS FIRMWARE VOIDS THE WARRANTY. USE IT AT YOUR OWN RISK!
How to upgrade firmware:
------------------------
1. Check the player "Model ID":
a. Make sure there is no disc inside
b. Go to SETUP/DISPLAY/TV Aspect and highlight 16:9
c. Press sequentially: 1, 3, 9 ,7, 1, 3, 9, ENTER
d. A system information page will appear
(note: factory defaults will be restored)
2. Rename the firmware file to "
.MIH"
3. Burn the "LG_DVD" folder on a CD-R/RW at the minimum burn speed
4. Load the disc in the player and follow the on-screen instructions
5. The upgrade process takes up to 2 minutes. When finished, the player will reboot
6. Restore factory defaults (see step 1)
How to change region code:
--------------------------
1. Open the tray
2. Press sequentially: PAUSE, 0, 0, 0, 0
3. A region code setup page will appear
4. Set the desired region code (0=region free)
How to change TV standard (PAL/NTSC/AUTO):
------------------------------------------
1. Open the tray
2. Press and hold the PAUSE button for 5 seconds
3. TV standard will be changed and reported on the player display
-EOF-