View Single Post
Staro 17.12.2024., 22:02   #1976
murina
Premium
Moj komp
 
murina's Avatar
 
Datum registracije: Jan 2007
Lokacija: St
Postovi: 490
Podloga je obrušena i očišćena, temeljna se dobro drži. Guli se glavna sa temeljne. Temeljnu nismo brusili:

Citiraj:
DUPLI-COLOR Galvinol is a special primer improving the adhesion on very smooth and non-porous surfaces, such as zinc, galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth surfaces.

Remains sticky at the surface and forms the perfect adhesion promoter for the subsequent painting with DUPLI-COLOR Alkyton Rust Protection.

Basis of the binder: sovent-based acrylic
Colour: bluish-transparent
Smell: solvent
Efficiency:
Theoretical: 35 m˛/l
Practical coverage depends on many factors such as roughness of the substrate and material losses during application
Drying (at 20°C, 50% relative air humidity):
Dust-dry: remains tacky
Re-coatable: after min. 30 minutes, but at least after 24 hours
Density: 0,87 kg/ltr.
Viscosity: 16-24 sec. Ford cup 4 at 20°X
Solid contents: 7 % by volume
VOC-content: 741 g/ l max., category A/h
EU Limit values: 750 g/ l (2007)/ 750 g/ l (2010)
Temperature resistance: up to 100°C

Sušila se nekoliko sati prije nanošenja glavne boje. Dobro smo sve promućkali i izmiješali. Brusili smo lagano prvu ruku boje kad smo skužili da se guli. Provjerit ću sutra rok trajanja svega. Istu boju sam nanosio na konstrukciju koja nije pocinčana i nije bilo nikakvih problema.

BTW super su ti kutije

@Hamm postoji "kupaonska rasvjeta" pa u tom smjeru gledaj
__________________
murina je offline   Reply With Quote