14.11.2024., 09:57
|
#371
|
McG
Datum registracije: Feb 2014
Lokacija: Varaždin
Postovi: 8,189
|
Taman se potrefilo.   Makar sudeći po ovim slikama, izgleda da je tip smrvil plastični dio socketa, dok je mehanizam sve skupa pritisnul i ode 9800X3D skupa s pločom.
Citiraj:
Judging by the chipped plastic of the socket, you either chipped this corner with the processor and then put the processor on it, or there was already a chip and you just didn't notice it, pinning it down with the processor. Hence, the processor was skewed, there was no normal clamping and the contacts were short-circuited. OP, what's going on with that socket? Part of this has already been pointed out, but it looks like the CPU may have been forced in while not being seated correctly. If the board was received like this, then you may have your culprit...
|
__________________
AMD Ryzen 9 9950X | Noctua NH-U12A chromax.black | MSI MAG B650 Tomahawk Wi-Fi | 128GB Kingston FURY Beast DDR5-5200 | 256GB AData SX8200 Pro NVMe | 2x4TB WD Red Plus | Fractal Define 7 Compact | Seasonic GX-750
AMD Ryzen 5 7600 | Noctua NH-U12A chromax.black | MSI MAG B650 Tomahawk Wi-Fi | 128GB Kingston FURY Beast DDR5-5200 | 256GB AData SX8200 Pro NVMe | 2x12TB WD Red Plus | Fractal Define 7 Compact | eVGA 650 B5
|
|
|