Citiraj:
Autor radi.neradi
zna li netko alternativni nacin kontroliranja brzine ventilatora na nvidia kartici bez koristenja signed nvidia drivera tj sa nouveau driverom?
pokusao sam postavit nouveau.config= 'NvFanPWM=1' koji postavi pwm1_enable=-1, a koji jedino mogu promjenit u 0. bez zadanog kernel parametra pwm1_enable=0 (default).
https://nouveau.freedesktop.org/Kern...arameters.html
izgleda NvFanPWM radi samo na puno starijim karticama, stoga ima li smisla flashat stariji vbios? trenutno 86.06.3C.00.78 na 10DE-1C02-1043-85CA.
sumnjam da se ista moze jer nisu ni za nouveau slozili fan speed kontrolu ali svakako da pitam. |
ok. odustao sam od rjesavanja prethodnog problema jer ako community nije uspio sloziti da radi kontrola brzine ventilatora, sumnjam da cu ja.
uzeo sam 3080 i podigao nvidia 550.67 driver. prilikom koristenja nouveau drivera, ljevi i desni gpu ventovi se ne okrecu, okrece se samo srednji. i to povremeno. nakon instalacije nvidia drivera, okrecu se svi. jesam li primoran koristit nvidia drivere cijelo vrijeme ili bi trebao moci vrtit nouveau za xorg a cuda i opencl po potrebi za hashcat, a istovremeno nemati problema sa temperaturom? definiran je target fan speed 40% na fan1 i fan2. target fan speed ce raditi samo kada se koristi proprietary nvidia driver?
ajde ako se nekome da pojasnit.. hvala.
Code:
# nvidia-smi
Thu Apr 25 01:31:16 2024
+-----------------------------------------------------------------------------------------+
| NVIDIA-SMI 550.67 Driver Version: 550.67 CUDA Version: 12.4 |
|-----------------------------------------+------------------------+----------------------+
| GPU Name Persistence-M | Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap | Memory-Usage | GPU-Util Compute M. |
| | | MIG M. |
|=========================================+========================+======================|
| 0 NVIDIA GeForce RTX 3080 Off | 00000000:2D:00.0 On | N/A |
| 0% 31C P8 21W / 340W | 117MiB / 10240MiB | 6% Default |
| | | N/A |
+-----------------------------------------+------------------------+----------------------+
+-----------------------------------------------------------------------------------------+
| Processes: |
| GPU GI CI PID Type Process name GPU Memory |
| ID ID Usage |
|=========================================================================================|
| 0 N/A N/A 1314 G /usr/libexec/Xorg 111MiB |
+-----------------------------------------------------------------------------------------+
Code:
# dmesg | grep -i nouveau
[ 2.047512] nouveau 0000:2d:00.0: NVIDIA GA102 (b72000a1)
[ 2.152273] nouveau 0000:2d:00.0: bios: version 94.02.26.48.41
[ 2.153265] nouveau 0000:2d:00.0: bios: M0203E type 0a
[ 2.153269] nouveau 0000:2d:00.0: fb: 10240 MiB of unknown memory type
[ 2.187499] nouveau 0000:2d:00.0: DRM: VRAM: 10240 MiB
[ 2.187501] nouveau 0000:2d:00.0: DRM: GART: 536870912 MiB
[ 2.187503] nouveau 0000:2d:00.0: DRM: BIT table 'A' not found
[ 2.187504] nouveau 0000:2d:00.0: DRM: BIT table 'L' not found
[ 2.187506] nouveau 0000:2d:00.0: DRM: TMDS table version 2.0
[ 2.187507] nouveau 0000:2d:00.0: DRM: DCB version 4.1
[ 2.187508] nouveau 0000:2d:00.0: DRM: DCB outp 00: 04800f86 04600020
[ 2.187510] nouveau 0000:2d:00.0: DRM: DCB outp 01: 04000f82 00020020
[ 2.187511] nouveau 0000:2d:00.0: DRM: DCB outp 02: 04011f72 00020010
[ 2.187513] nouveau 0000:2d:00.0: DRM: DCB outp 04: 02822f66 04600020
[ 2.187514] nouveau 0000:2d:00.0: DRM: DCB outp 05: 02022f62 00020020
[ 2.187515] nouveau 0000:2d:00.0: DRM: DCB outp 07: 02033f52 00020010
[ 2.187516] nouveau 0000:2d:00.0: DRM: DCB outp 08: 01844f36 04600010
[ 2.187518] nouveau 0000:2d:00.0: DRM: DCB outp 09: 01044f32 00020010
[ 2.187519] nouveau 0000:2d:00.0: DRM: DCB conn 00: 02000046
[ 2.187520] nouveau 0000:2d:00.0: DRM: DCB conn 01: 01000161
[ 2.187521] nouveau 0000:2d:00.0: DRM: DCB conn 02: 00020246
[ 2.187522] nouveau 0000:2d:00.0: DRM: DCB conn 03: 00010361
[ 2.187523] nouveau 0000:2d:00.0: DRM: DCB conn 04: 00001446
[ 2.188059] nouveau 0000:2d:00.0: DRM: MM: using COPY for buffer copies
[ 2.189938] [drm] Initialized nouveau 1.3.1 20120801 for 0000:2d:00.0 on minor 0
[ 2.277488] fbcon: nouveaudrmfb (fb0) is primary device
[ 2.277491] nouveau 0000:2d:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[ 8.312797] snd_hda_intel 0000:2d:00.1: bound 0000:2d:00.0 (ops nv50_audio_component_bind_ops [nouveau])
Code:
# dmesg | grep -i nvidia
[ 9.308070] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card1/input22
[ 9.308162] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card1/input23
[ 9.308298] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card1/input24
[ 9.308534] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:2d:00.1/sound/card1/input25
[ 9.453879] nvidia: loading out-of-tree module taints kernel.
[ 9.453887] nvidia: module license 'NVIDIA' taints kernel.
[ 9.453890] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[ 9.453891] nvidia: module license taints kernel.
[ 9.800289] nvidia-nvlink: Nvlink Core is being initialized, major device number 234
[ 9.801657] nvidia 0000:2d:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 9.853226] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 550.67 Tue Mar 12 23:54:15 UTC 2024
[ 9.879394] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 550.67 Tue Mar 12 23:29:25 UTC 2024
[ 9.881924] [drm] [nvidia-drm] [GPU ID 0x00002d00] Loading driver
[ 9.881926] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:2d:00.0 on minor 0
[ 59.302077] nvidia_uvm: module uses symbols nvUvmInterfaceDisableAccessCntr from proprietary module nvidia, inheriting taint.
[ 59.397224] nvidia-uvm: Loaded the UVM driver, major device number 510.
edit: rjeseno modprobe.blacklist