Citiraj:
|
Autor -=_GTI_=-
danas bi trebao frendu ugradit jednu takvu pa chu vidit jel se moze otkljucat.
ot: s kojim se programom otkljucavaju radeonke?
|
Before you load and save from RaBiT you need to edit a copy of the original
bios with a hex editor. I download an editor named "010 Editor" for a try
and seems to work OK but there are many available. In my BIOS the byte at
address 0x7A was 0x61. The "1" here disables one quad ( 4 pipes). I edited
0x7A to read "60" and then saved the file. I then loaded and resaved with
RaBiT which I think only needs to produce a correct checksum.
Of course before any of this happens you need to verify that the fuses are
not hardware locked per
http://www.techpowerup.com/articles..ing/vidcard/127
I'm not sure if this is relevant but there seems to be several versions of
the Sapphire X800GTO AGP board with possibilities for R430 and R480 cores.
My version is R430 on a red ATI X800 XL type board. Some of the reviews I
have seen show the card with a blue board (like the PCI Express version)
that looks shorter than mine and has a completly different heatsink. Some
boards are hardware locked and cannot be modded with just a BIOS change.