|
EMP moderator
Datum registracije: Apr 2005
Lokacija: Osijek
Postovi: 18,832
|
Kroz GUI je sve zeleno...
A u terminalu kaže da ne podržava SMART, ne znam tko tu koga...
Code:
root@Domy-NAS:/var/log# smartctl -a /dev/sata1
smartctl 6.5 (build date Mar 2 2021) [x86_64-linux-4.4.59+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: WDC
Product: WD8003FFBX-68B9A
Revision: 0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca0c6d34591
Serial number: VYHBD7RM
Device type: disk
Local Time is: Thu Jun 1 18:01:59 2023 CEST
SMART support is: Unavailable - device lacks SMART capability.
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
root@Domy-NAS:/var/log# smartctl -a /dev/sata2
smartctl 6.5 (build date Mar 2 2021) [x86_64-linux-4.4.59+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: WDC
Product: WD8003FFBX-68B9A
Revision: 0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca0c6d3485e
Serial number: VYHBDZVM
Device type: disk
Local Time is: Thu Jun 1 18:02:04 2023 CEST
SMART support is: Unavailable - device lacks SMART capability.
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
root@Domy-NAS:/var/log# smartctl -a /dev/sata3
smartctl 6.5 (build date Mar 2 2021) [x86_64-linux-4.4.59+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: WDC
Product: WD8003FFBX-68B9A
Revision: 0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca0c6d340dd
Serial number: VYHBAZWM
Device type: disk
Local Time is: Thu Jun 1 18:02:07 2023 CEST
SMART support is: Unavailable - device lacks SMART capability.
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
root@Domy-NAS:/var/log# smartctl -a /dev/sata4
smartctl 6.5 (build date Mar 2 2021) [x86_64-linux-4.4.59+] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Vendor: WDC
Product: WD8003FFBX-68B9A
Revision: 0A83
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Logical block size: 512 bytes
Physical block size: 4096 bytes
LU is fully provisioned
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Logical Unit id: 0x5000cca0c6d325a2
Serial number: VYHB3S0M
Device type: disk
Local Time is: Thu Jun 1 18:02:08 2023 CEST
SMART support is: Unavailable - device lacks SMART capability.
=== START OF READ SMART DATA SECTION ===
Current Drive Temperature: 0 C
Drive Trip Temperature: 0 C
Error Counter logging not supported
[GLTSD (Global Logging Target Save Disable) set. Enable Save with '-S on']
Device does not support Self Test logging
I evo koliko mu traje restart, ne znam ima li koji prikladniji log...
Code:
root@Domy-NAS:/var/log# grep "2023-06-01" synologydrive.log
2023-06-01T14:57:54+02:00 Domy-NAS cloud-workerd: scemd_connector/scemd_connector.c:209 System isn't ready, so cannot get scemd status.
2023-06-01T14:57:55+02:00 Domy-NAS cloud-workerd: scemd_connector/scemd_connector.c:209 System isn't ready, so cannot get scemd status.
2023-06-01T14:57:56+02:00 Domy-NAS cloud-workerd: scemd_connector/scemd_connector.c:209 System isn't ready, so cannot get scemd status.
2023-06-01T14:57:57+02:00 Domy-NAS cloud-workerd: SYSTEM: Last message 'scemd_connector/scem' repeated 3 times, suppressed by syslog-ng on Domy-NAS
2023-06-01T14:57:57+02:00 Domy-NAS cloud-control: (25815:27456) [INFO] daemon-control.cpp(152): Stopping clientd
2023-06-01T14:57:57+02:00 Domy-NAS cloud-control: (25815:27456) [INFO] daemon-control.cpp(152): Stopping syncd
2023-06-01T14:57:57+02:00 Domy-NAS cloud-control: (25815:27456) [INFO] daemon-control.cpp(152): Stopping workerd
2023-06-01T14:57:57+02:00 Domy-NAS cloud-control: (25815:27456) [INFO] daemon-control.cpp(152): Stopping apid
2023-06-01T14:58:00+02:00 Domy-NAS syncd: scemd_connector/scemd_connector.c:209 System isn't ready, so cannot get scemd status.
2023-06-01T14:58:01+02:00 Domy-NAS cloud-control: (25815:27456) [INFO] daemon-control.cpp(152): Stopping vmtouchd
2023-06-01T14:58:01+02:00 Domy-NAS cloud-control: (25815:27456) [INFO] daemon-control.cpp(152): Stopping redis
2023-06-01T14:58:01+02:00 Domy-NAS cloud-control: (25815:27456) [INFO] daemon-control.cpp(152): Stopping authd
2023-06-01T14:58:01+02:00 Domy-NAS synodrive-redis[18324]: User requested shutdown...
2023-06-01T14:58:01+02:00 Domy-NAS synodrive-redis[18324]: Redis is now ready to exit, bye bye...
2023-06-01T15:23:07+02:00 Domy-NAS updater-svr: Start updater, database is located at '/volume1'
2023-06-01T15:23:08+02:00 Domy-NAS updater-svr: End updater, ret = 0
2023-06-01T15:23:08+02:00 Domy-NAS cloud-control: share_name_path_get.c:309 Fail to get share by path [/volume1/@synologydrive]. [0x1400 share_name_path_get.c:137]
2023-06-01T15:23:08+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] sdk-cpp.cpp(1752): SYNOSharePathGet(/volume1/@synologydrive/@sync): no such share
2023-06-01T15:23:08+02:00 Domy-NAS cloud-control: (17910:78304) [ERROR] share-service.cpp(31): SYNOShareGet(): -1 Error code: 5120
2023-06-01T15:23:08+02:00 Domy-NAS cloud-control: share_name_path_get.c:309 Fail to get share by path [/volume1/@synologydrive]. [0x1400 share_name_path_get.c:137]
2023-06-01T15:23:08+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] sdk-cpp.cpp(1752): SYNOSharePathGet(/volume1/@synologydrive/@sync): no such share
2023-06-01T15:23:08+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] daemon-control.cpp(123): Starting vmtouchd
2023-06-01T15:23:08+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] daemon-control.cpp(123): Starting redis
2023-06-01T15:23:08+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] daemon-control.cpp(123): Starting authd
2023-06-01T15:23:08+02:00 Domy-NAS synodrive-redis[17941]: Server initialized
2023-06-01T15:23:09+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] daemon-control.cpp(123): Starting clientd
2023-06-01T15:23:09+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] daemon-control.cpp(123): Starting syncd
2023-06-01T15:23:09+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] daemon-control.cpp(123): Starting workerd
2023-06-01T15:23:09+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] daemon-control.cpp(123): Starting apid
2023-06-01T15:23:11+02:00 Domy-NAS cloud-control: (17910:78304) [INFO] daemon-control.cpp(140): all daemon started.
Od aplikacija ništa posebno nemam...
|