[Odinarius]

***ClockTuner for Ryzen 2.1 RC5(ver.23) by 1usmus***
AMD Ryzen 5 3600 6-Core Processor
GIGABYTE B550 AORUS ELITE
BIOS ver. F10 SMU ver. 46.64.00
TABLE ver. 2361603
DRAM speed 3200 MHz
05/15/2021 09:55:08


P1
FREQ CCX1# 0MHz
FREQ CCX2# 0MHz
VID# 1175mV
Usage trigger# 81%
OB CCX1# 1
OB CCX2# 1
P2
FREQ CCX1# 0MHz
FREQ CCX2# 0MHz
VID# 1275mV
Usage trigger# 58%
OB CCX1# 1
OB CCX2# 1
PX
FREQ HIGH# 0MHz
FREQ MID# 0MHz
FREQ LOW# 0MHz
VID HIGH# 1450mV
VID MID# 1425mV
VID LOW# 1400mV
OB HIGH# 1
OB MID# 1
OB LOW# 1
Usage trigger# 24%
PX OB LIMIT# 75MHz


Phoenix ready!
Cinebench R20 started
Cinebench R20 finished with result: 3600
Voltage: 1.38 V PPT: 62.6 W Temperature: 65.2°


09:57:21: Silicon FIT measurement started...
09:57:39: Silicon FIT measurement done!
09:57:39: Stress test stopped.


CCX COEFFICIENTS
CCX# 1 0 CPPC 127
CCX# 2 0 CPPC 116


CORES ORDER (from the best to the worst)
### CPPC FIT
1 С03 С05
2 С02 С03
3 С01 С04
4 С05 С02
5 С04 С01
6 С06 С06




AVX light mode
Cycle time: 60000 ms
Reference frequency: 4050MHz
Reference voltage: 1350 mV
Voltage step: 6 mV


Manual overclocking mode enabled
9:57:42: Saving temporary settings...
9:57:47: CCX1 (127): 4050 MHz, 1350 mV
9:57:47: CCX2 (116): 4050 MHz, 1350 mV
9:57:47: Step# 1. Diagnostic VID: 1350 mV
9:57:47: Stress test 1 started...
9:58:22: Stress test stopped.
9:58:23: Stress test 2 started...
9:58:57: Stress test stopped.
9:58:58: Step# 2. Diagnostic VID: 1344 mV
9:58:58: Stress test 1 started...
9:59:32: Stress test stopped.
9:59:34: Stress test 2 started...
10:00:08: Stress test stopped.
10:00:09: Step# 3. Diagnostic VID: 1338 mV
10:00:09: Stress test 1 started...
10:00:43: Stress test stopped.
10:00:44: Stress test 2 started...
10:01:19: Stress test stopped.
10:01:20: Step# 4. Diagnostic VID: 1332 mV
10:01:20: Stress test 1 started...
10:01:54: Stress test stopped.
10:01:55: Stress test 2 started...
10:02:30: Stress test stopped.
10:02:31: Step# 5. Diagnostic VID: 1326 mV
10:02:31: Stress test 1 started...
10:03:05: Stress test stopped.
10:03:06: Stress test 2 started...
10:03:40: Stress test stopped.
10:03:41: Step# 6. Diagnostic VID: 1320 mV
10:03:42: Stress test 1 started...
10:04:16: Stress test stopped.
10:04:17: Stress test 2 started...
10:04:51: Stress test stopped.
10:04:52: Step# 7. Diagnostic VID: 1314 mV
10:04:52: Stress test 1 started...
10:05:27: Stress test stopped.
10:05:28: Stress test 2 started...
10:06:02: Stress test stopped.
10:06:03: Step# 8. Diagnostic VID: 1308 mV
10:06:03: Stress test 1 started...
10:06:38: Stress test stopped.
10:06:39: Stress test 2 started...
10:07:13: Stress test stopped.
10:07:14: Step# 9. Diagnostic VID: 1302 mV
10:07:14: Stress test 1 started...
10:07:48: Stress test stopped.
10:07:50: Stress test 2 started...
10:08:02: Thread# 3 fall down!
10:08:02: Stress test stopped.
10:08:04: Step# 10. Diagnostic VID: 1308 mV


DIAGNOSTIC RESULTS
AMD Ryzen 5 3600 6-Core Processor
CPU VID: 1308
CPU TEL: 1296
Max temperature: 56,4°
Energy efficient: 3,12
Your CPU is BRONZE SAMPLE
Recomended values for overclocking (P1 profile):
Reference voltage: 1250 mV
Reference frequency: 3850 MHz
Recomended values for overclocking (P2 profile):
Reference voltage: 1350 mV
Reference frequency: 4000 MHz
Recomended values for undervolting:
Reference voltage: 1175 mV
Reference frequency: 3700 MHz



Phoenix deactivated!

4100 na 1.3 odmah izbacuje errore.

AVX Light mode
Cycle time: 360000 ms
Reference frequency: 4100 MHz
CCX delta: 25 MHz
Reference voltage: 1300 mV
Target voltage: 1300 mV

Manual overclocking mode enabled
10:18:46: Saving temporary settings...

Step# 1
10:18:51: CCX1 (127): 4100 MHz, 1300 mV OC+
10:18:51: CCX2 (116): 4100 MHz, 1300 mV OC+
10:18:52: Stress test #1 started...
10:18:56: CPU Vdroop: 0,4 % temperature: 52,2°
10:18:56: CCX1 overclocking failure detected!
10:18:56: Thread# 3 fall down!
10:18:56: Stress test stopped.

Step# 2
10:18:59: CCX1 (127): 4075 MHz, 1300 mV OC=
10:18:59: CCX2 (116): 4100 MHz, 1300 mV OC=
10:19:00: Stress test #1 started...
10:19:04: CPU Vdroop: 0,5 % temperature: 51,9°
10:19:05: CCX1 overclocking failure detected!
10:19:05: Thread# 3 fall down!
10:19:05: Stress test stopped.

Tuningom dobijem 52 C20 boda za 10 stupnjeva više zagrijavanja, koja smijurija