Citiraj:
Autor mann
P.s. Dali radi rukernel sa 7590?
|
Neće. Ni sa 74xx isto ne radi.
Što se tiče ovoga, provjereno radi na 7490. Prebacivao jedan njemački.
"Switch your PC to a fixed IP in the 192.168.178.0 network. Disconnect the FritzBox from the mains. Make sure nothing else but your PC is connected to the Fritz!Box (however is some cases it can help to have a switch between the Fritz!Box and your PC). Open a MS-DOS Window and type ftp 192.168.178.1 (wait for the Enter). Connect your FritzBox to the mains, and try to connect to the FTP server. It may take you several trials and errors to catch the correct time-frame. Once connected to the FTP server, login with adam2/adam2. Now type exactly the following lines:
quote SETENV firmware_version avme
quote REBOOT
The Fritz!Box will reboot now, and goes into an endless reboot loop. It looks like the FritzBox is broken. No panic, this is normal behaviour: the German Firmware will not load because we changed the "firmware_version" to avme Now you can start the international recovery program and follow the instructions on your screen. Do not forget to reset your PC to a dynamic IP (if needed)"