[domy_os]

Autor chillout23

Sad vidio link i otvara trenutno u FF

Ma problem je bio u VPN-u, bez njega normalno otvara. Instalirao i ne vidim neki napredak u odnosu na stanje prije instalacije, možda sam nešto krivo napravio...

[domy@domy-nb ~]$ sudo tlp-stat -b
[sudo] password for domy: 
--- TLP 1.3.1 --------------------------------------------

+++ Battery Features: Charge Thresholds and Recalibrate
natacpi    = active (data, thresholds)
tpacpi-bat = active (recalibrate)
tp-smapi   = inactive (ThinkPad not supported)

+++ ThinkPad Battery Status: BAT0 (Main / Internal)
/sys/class/power_supply/BAT0/manufacturer                   = SANYO
/sys/class/power_supply/BAT0/model_name                     = 01AV419
/sys/class/power_supply/BAT0/cycle_count                    =     16
/sys/class/power_supply/BAT0/energy_full_design             =  24020 [mWh]
/sys/class/power_supply/BAT0/energy_full                    =  21180 [mWh]
/sys/class/power_supply/BAT0/energy_now                     =  16590 [mWh]
/sys/class/power_supply/BAT0/power_now                      =      0 [mW]
/sys/class/power_supply/BAT0/status                         = Unknown

/sys/class/power_supply/BAT0/charge_start_threshold         =     75 [%]
/sys/class/power_supply/BAT0/charge_stop_threshold          =     80 [%]
tpacpi-bat.BAT0.forceDischarge                              =      0

Charge                                                      =   78.3 [%]
Capacity                                                    =   88.2 [%]

+++ ThinkPad Battery Status: BAT1 (Ultrabay / Slice / Replaceable)
/sys/class/power_supply/BAT1/manufacturer                   = LGC
/sys/class/power_supply/BAT1/model_name                     = 01AV490
/sys/class/power_supply/BAT1/cycle_count                    =     26
/sys/class/power_supply/BAT1/energy_full_design             =  23940 [mWh]
/sys/class/power_supply/BAT1/energy_full                    =  22120 [mWh]
/sys/class/power_supply/BAT1/energy_now                     =  16700 [mWh]
/sys/class/power_supply/BAT1/power_now                      =      0 [mW]
/sys/class/power_supply/BAT1/status                         = Unknown

/sys/class/power_supply/BAT1/charge_start_threshold         =     75 [%]
/sys/class/power_supply/BAT1/charge_stop_threshold          =     80 [%]
tpacpi-bat.BAT1.forceDischarge                              =      0

Charge                                                      =   75.5 [%]
Capacity                                                    =   92.4 [%]

+++ Charge total                                            =   76.9 [%]

Idem dalje istraživati, GUI mi se čini malo laggy, valjda drugi driver treba staviti. Smart card i finger print readeri ne rade, na net se ručno moram spajati itd. pa još to moram popeglati.