View Single Post
Staro 12.01.2006., 00:04   #1
ivan OS
Premium
Moj komp
 
ivan OS's Avatar
 
Datum registracije: Nov 2003
Lokacija: Osijek
Postovi: 910
Predložak prvog unosa u OVERCLOCK bazu podataka

DFI LANPARTY nF4 Ultra-D - 7/04-2 BigToe BIOS

AMD Opteron 148 CABYE 0543 FPMW

2 x 1024MB OCZ EB PC4000 Platinum Edition

Gainward 7800GTX 256MB 81.98 xtremeG 510/1400

Maxtor 200GB SATA hdd (8MB cache)

Pioneer 109Bk

Plextor TA 48/24/48

Tagan 530W U22 2Force



==========


Genie BIOS Settings:

Fsb Bus Frequency - 273
LDT/Fsb Frequency Ratio - 3x
CPU/Fsb Frequency Ratio - 11x
PCI eXpress Frequency - 100Mhz

CPU VID StartUp Value - 1.450

CPU VID Control - 1.450
CPU VID Special Control - Above VID * 104%
LDT Voltage Control - 1.4v
Chip Set Voltage Control - 1.60v
DRAM Voltage Control - 2.70v


DRAM Configuration Settings:

DRAM Frequency Set - 200=RAM/HTT 1:1
Command Per Clock (CPC) - Enable
CAS Latency Control (Tcl) - 3
RAS# to CAS# delay (Trcd) - 03 Bus Clocks
Min RAS# active time (Tras) - 08 Bus Clocks
Row precharge time (Trp) - 02 Bus Clocks
Row Cycle time (Trc) - 11 Bus Clocks
Row refresh cyc time (Trfc) - 16 Bus Clocks
Row to Row delay (Trrd) - 03 Bus Clocks
Write recovery time (Twr) - 03 Bus Clocks
Write to Read delay (Twtr) - 02 Bus Clocks
Read to Write delay (Trwt) - 03 Bus Clocks
Refresh Period (Tref) - 3210 Cycles
Write CAS Latency (Twcl) - Auto
DRAM Bank Interleave - Enabled

DQS Skew Control - Auto
DQS Skew Value - 0
DRAM Drive Strength - weak 4
DRAM Data Drive Strength - Level 2
Max Async Latency - 8.0 Nano Seconds
DRAM Response Time - Normal
Read Preamble Time - 6.0 Nano Seconds
IdleCycle Limit - 256 Cycles
Dynamic Counter - Disable
R/W Queue Bypass - 16 x
Bypass Max - 04 x
32 Byte Granularity - Disable(4 Bursts)



==========


Prime95 + 3dMark2001SE + CPU-Z 1.31 + Everest(read) 2.50.480:





3dMark2003:




3dMark2005:




Aquamark 3d:




==========



kratak opis:
273x11 @ 3003Mhz, 1.450v + 104%
3-3-2-8 @ 2.7v vdimm

Zadnje izmijenjeno od: ivan OS. 12.01.2006. u 07:41.
ivan OS je offline   Reply With Quote