Citiraj:
|
If an SSD is recognized as SATAFIRM S11, it means that the firmware information of the SSD has been rewritten. It’s probably that the SSD is dead.
|
Eto, nazdravi mu jednu i moze na ukop
Citiraj:
This utility designed for repair Phison S11 based SSD from Protect Mode.
The drive in this state detected as "SATAFIRM S11" or "INIC6081SSDWP".
System requirements: windows xp sp2 or above, x86 or x64.
Preferable using AHCI mode of disk controller, but possible work in SATA(IDE) mode and also usb via some bridge from asmedia or jmicron.
Utility request disk number, which can be viewed in "Computer Managment"/"Disk Managment".
After successfully complete you should do a power cycle for SSD.
Run example:
repairS11 2
|
https://drive.google.com/file/d/1irs...ew?usp=sharing
Probaj....