Nisam si bas doma s mrezama, pa cu napisati korak po korak sto sam radio (i ne radi
).
Windows 7, host, 192.168.5.103
Windows 10, VM guest, 192.168.5.155
IP od VPN-a koji dobijem na Windows 10 guestu, 192.168.10.8
IP od servera na kojeg se spajam preko VPN-a, 192.168.11.6
Napominjem da iz W10 guesta sve prema tom serveru radi!
U W7 (host) sam napravio sljedece:
Code:
C:\>route add 192.168.5.0 mask 255.255.255.0 192.168.5.155 metric 2
OK!
C:\>route print
===========================================================================
Interface List
16...fc aa 14 9e 5b a3 ......Killer E2200 Gigabit Ethernet Controller
15...00 02 5b 01 0d 63 ......Bluetooth Device (Personal Area Network) #2
18...0a 00 27 00 00 12 ......VirtualBox Host-Only Ethernet Adapter
1...........................Software Loopback Interface 1
13...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
19...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3
===========================================================================
IPv4 Route Table
===========================================================================
Active Routes:
Network Destination Netmask Gateway Interface Metric
0.0.0.0 0.0.0.0 192.168.5.1 192.168.5.103 10
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
192.168.5.0 255.255.255.0 On-link 192.168.5.103 266
192.168.5.0 255.255.255.0 192.168.5.155 192.168.5.103 12
192.168.5.103 255.255.255.255 On-link 192.168.5.103 266
192.168.5.255 255.255.255.255 On-link 192.168.5.103 266
192.168.56.0 255.255.255.0 On-link 192.168.56.1 266
192.168.56.1 255.255.255.255 On-link 192.168.56.1 266
192.168.56.255 255.255.255.255 On-link 192.168.56.1 266
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.5.103 266
224.0.0.0 240.0.0.0 On-link 192.168.56.1 266
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.5.103 266
255.255.255.255 255.255.255.255 On-link 192.168.56.1 266
===========================================================================
Persistent Routes:
None
IPv6 Route Table
===========================================================================
Active Routes:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
16 266 fe80::/64 On-link
18 266 fe80::/64 On-link
18 266 fe80::bdf4:efa3:8b85:3dea/128
On-link
16 266 fe80::e58a:b40a:c2dc:17a3/128
On-link
1 306 ff00::/8 On-link
16 266 ff00::/8 On-link
18 266 ff00::/8 On-link
===========================================================================
Persistent Routes:
None
Na W10 guestu Routing and Remote Access servis je upaljen kao i editiran Registry kljuc (cak sam napravio i restart) a Windows firewall zagasen.
Iz guesta sve i dalje radi, ali na hostu ne mogu doprijeti do 192.168.11.6 masine.
Ne razumijem zasto promet prema 192.168.11.6 s hosta ide "u krivo".
Code:
C:\>tracert 192.168.11.6
Tracing route to 192.168.11.6 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 192.168.5.1
2 6 ms 6 ms 6 ms bng03.net.iskon.hr [213.191.132.176]
3 6 ms 6 ms 5 ms 89.164.64.94
4 21 ms 7 ms 6 ms ^C
C:\>tracert 192.168.5.155
Tracing route to virtual-w10 [192.168.5.155]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms virtual-w10 [192.168.5.155]
Trace complete.