Str 45.
Citiraj:
Loading the SATA RAID or SATA Driver
Follow the steps below if the SATA drive is the primary drive in the system:
a) With Microsoft Windows† 2000 and Windows XP, do the following:
1. As Windows Setup begins, press <F6> to specify the SATA RAID or SATA driver.
2. Press <S> to specify an additional device.
3. Insert the floppy disk labeled SATA drivers and press <Enter>.
4. If RAID has been configured in BIOS, press <Enter> to select the Silicon Image Serial
ATA RAID Controller; if not, press <Enter> to select the Silicon Image SiI 3112 Serial
ATA Controller.
5. Press <Enter> to continue Windows Setup.
|
Jesi proba ovo (MMI je već spomenija)?
Izvor:
http://downloadmirror.intel.com/1533..._English01.pdf
EDIT Probaj jumper stavit na 2 lijeva pina na tom HDD-u (slika 24.)
http://www.seagate.com/staticfiles/s...100417177c.pdf