Stvarno ne shvatam sto je bolje, sa ravnim ili postranim (zaobljenim), ostrim ili glatkim rubovima?
Radije bih mislim zaobljenih, glatkih rubova. Ili? Vi? 
I da provjerim, Sony Xperia Z3 NEMA Gorilla Glass 3????
Komentar koji sam nasao o ovom Nilkin protektoru:
"The material is comparable to Gorilla Glass.
It is Japan made AGC glass. If you google agc class vs gorilla glass, you will find endless debate  "
Ako je to ovo:
http://www.slashgear.com/agc-dragont...crown-20127435
http://www.fastcompany.com/1719138/d...ugh-glass-game
Citat koji upada u oci:
"As an engineer, i can definitely say that shatter-proof does not mean impact proof. You can shoot ammo from a sniper rifle, and the armor might stop it, but the damage will probably still be there.
Back to phones, i personally prefer Dragontrail over Gorilla. If what they say is true, Dragontrail glass sacrifices a bit of scratch resistancy to improve its shatter-resistance. I've seen many Galaxy S3's and Note 2's with cracked screens but no scratches. If that's the case, i'd rather just get a Dragontail glass with a good screen protector and swap that every year or two."
Znaci Gorilla Glass je manje otporna na napuknuca nego na ogrebotine, dok je sa ovom Nillkin zrtvujemo nesto ogrebotina a dobijemo bolju zastitu od napuknuca (a ima zastitu i sprijeda i straga mobitela)
Jesam li dobro shvatio??? Kako je to moguce????
"Selected and used Japan imported AGC glass material and HARVES nanotechnology with excellent defensive performance. It owns super high transmittance and high restoring the original color of screen. It supports anti-glare coating to prevent glare derivative. Used tempered glass, its hardness up to 9H; scratch-resistant flowers and blowout. Its surface used Nanometer thin oil coating which is anti-fingerprint, oil rub resistance and effectively preventing and filtering ultraviolet ray. It also fused the global advanced screen protector process technology. Its thickness is only 0.3mm with precise CNC cutting technology. 2.5D edging craft make the film fit the screen easily, combine the film and phone body better. At the same time, there will no risk to hurt our hands in the process. It creates perfect edges; make the film thinner, clearer and safer. Environmental and silicon coating; quicker adsorption and can be reused after cleaning.
Da, shvatio sam napokon, VALJDA   . Sa H koji ima ostre rubove moze se i posjeci, a kod H+ 2.5 dimenzionalni rub ima "film" koji stane na zaslon lako kombinirajuci "filmski" i "telefonski" dio mobitela (haha tesko prevesti ). Istovremeno je bez rizika povrede ruke u procesu postavljanja. To stvara savrsene. glatke rubove, a postavljeni film je tanji, jasniji i sigurniji. Ima i silikonski premaz (valjda sa vanjske strane pobogu ???? ?????), brzu adsorpciju i moze se ponovno koristiti nakon ciscenja.
VIDEO PREZENTACIJA : http://www.youtube.com/watch?v=61fnJu3HZKg http://www.youtube.com/watch?v=XZnJ_EvL6CM http://www.youtube.com/watch?v=cGitbfqOc8k -->
Pitao sam Sandisk na email o toj kartici i dao link da vide, nema jos odgovora...
Nego,
sta je bolje od ovih zastita za ekran za Z3?
http://www.ebay.com/itm/Nillkin-9H-H...item1e920c5728 ovo H+ znaci 2.5D Curved Edge (čega 2,5 zaobljenih rubova, što mu znači D i zašto bi uzeo zaobljenih rubova?? )
http://www.ebay.com/itm/Screen-Prote...item3a98354b02 H znaci Flat Edge (ravnih rubova)
Moze neko prevesti:
H+ (The edge of Glass screen protector is 2.5D dimensional for smooth touch)
H (Anti-clip round edge, negdje pise flat edge)
H and H+ are both made using the same materials. There is no difference in strength/ hardness. It is made from tempered glass.
Difference between H and H+ is that H has straight edges while H+ has slanted edges.
H is straight edge. When you put it on, you will feel a quite sharp edges. H+ is round edge. You will feel quite smooth on the edges.
Stvarno ne shvatam sto je bolje, sa ravnim ili postranim (zaobljenim), ostrim ili glatkim rubovima?
Radije bih mislim zaobljenih, glatkih rubova. Ili? Vi?
I da provjerim, Sony Xperia Z3 NEMA Gorilla Glass 3????
Komentar koji sam nasao o ovom Nilkin protektoru:
"The material is comparable to Gorilla Glass.
It is Japan made AGC glass. If you google agc class vs gorilla glass, you will find endless debate "
Ako je to ovo:
http://www.slashgear.com/agc-dragont...crown-20127435
http://www.fastcompany.com/1719138/d...ugh-glass-game
Citat koji upada u oci:
"As an engineer, i can definitely say that shatter-proof does not mean impact proof. You can shoot ammo from a sniper rifle, and the armor might stop it, but the damage will probably still be there.
Back to phones, i personally prefer Dragontrail over Gorilla. If what they say is true, Dragontrail glass sacrifices a bit of scratch resistancy to improve its shatter-resistance. I've seen many Galaxy S3's and Note 2's with cracked screens but no scratches. If that's the case, i'd rather just get a Dragontail glass with a good screen protector and swap that every year or two."
Znaci Gorilla Glass je manje otporna na napuknuca nego na ogrebotine, dok je sa ovom Nillkin zrtvujemo nesto ogrebotina a dobijemo bolju zastitu od napuknuca (a ima zastitu i sprijeda i straga mobitela)
Jesam li dobro shvatio??? Kako je to moguce????
"Selected and used Japan imported AGC glass material and HARVES nanotechnology with excellent defensive performance. It owns super high transmittance and high restoring the original color of screen. It supports anti-glare coating to prevent glare derivative. Used tempered glass, its hardness up to 9H; scratch-resistant flowers and blowout. Its surface used Nanometer thin oil coating which is anti-fingerprint, oil rub resistance and effectively preventing and filtering ultraviolet ray. It also fused the global advanced screen protector process technology. Its thickness is only 0.3mm with precise CNC cutting technology. 2.5D edging craft make the film fit the screen easily, combine the film and phone body better. At the same time, there will no risk to hurt our hands in the process. It creates perfect edges; make the film thinner, clearer and safer. Environmental and silicon coating; quicker adsorption and can be reused after cleaning.
Da, shvatio sam napokon, VALJDA . Sa H koji ima ostre rubove moze se i posjeci, a kod H+ 2.5 dimenzionalni rub ima "film" koji stane na zaslon lako kombinirajuci "filmski" i "telefonski" dio mobitela (haha tesko prevesti ). Istovremeno je bez rizika povrede ruke u procesu postavljanja. To stvara savrsene. glatke rubove, a postavljeni film je tanji, jasniji i sigurniji. Ima i silikonski premaz (valjda sa vanjske strane pobogu ???? ?????), brzu adsorpciju i moze se ponovno koristiti nakon ciscenja.
VIDEO PREZENTACIJA : http://www.youtube.com/watch?v=61fnJu3HZKg http://www.youtube.com/watch?v=XZnJ_EvL6CM http://www.youtube.com/watch?v=cGitbfqOc8k
Zadnje izmijenjeno od: dinox. 01.11.2014. u 04:03.
|