Citiraj:
Autor fizicica
Znam da cu mozda ispasti glup, ali jel se TL-WR841ND mora spojiti iskljucivo kabelom na ruter ili ima i mod da copi wireless i dila ga dalje. Gledao sam user manual i ne cini mi se da to moze, pa cisto pitam.
|
pročitaj što piše pod WDS Bridge.
Enable WDS - Check this box to enable WDS. With this function, the router can bridge two or
more WLANs. If this checkbox is selected, you will have to set the following parameters as
shown below. Make sure the following settings are correct.
SSID(to be bridged) - The SSID of the AP your router is going to connect to as a client.
You can also use the search function to select the SSID to join.
BSSID(to be bridged) - The BSSID of the AP your router is going to connect to as a
client. You can also use the search function to select the BSSID to join.
WDS Mode - This field determines which WDS Mode will be used. It is not necessary to
change the WDS Mode unless you notice network communication problems with root
AP. If you select Auto, then router will choose the appropriate WDS Mode automatically.