Bok!
Vec pola sata pokusavam uci u WEB sucelje od HP 1810-24G level2 (J9803A) switcha i nikako da uspijem
.
Naime u manualima pise je ovo:
By default, the switch is assigned the following static IP information for access to the Web interface:
■ IP address: 192.168.2.10
■ Network mask: 255.255.255.0
■ Gateway: 0.0.0.0
1. Connect the switch to the management PC or to the network using any of the available network
ports.
2. Power on the switch.
3. Set the IP address of the management PC’s network adaptor to be in the same subnet as the switch.
Example: Set it to IP address 192.168.2.12, mask 255.255.255.0.
4. Enter the IP address shown above in the Web browser. See page 1-3 for web browser requirements.
Thereafter, use the Web interface to configure a different IP address or configure the switch as a DHCP
client so that it receives a dynamically assigned IP address from the network.
Note ■ If you enable DHCP for IP network configuration, the switch must be connected to the same
network as the DHCP server. You will need to access your DHCP server to determine the IP
address assigned to the switch.
Naravno pokusao sam tu 192.168.2.10 i nista tu ne otvara ali swithc RADI, sve sot je ustekano najnormalnije radi (evo i surfma preko njega) sto pretpostalvjam znaci d aje sma pokupio DHCP i postelo. Ali ja zelim uci u WEB management servis a neznam kako
?
Pokusao sam odskenirati sve IP adrese u rangeu 192.168.0.0 do 192.168.2.255 i nadje mi samo router, printer, NAS, Andorid device i jednu adresu na 192.168.1.253 (sve pronadjene su u 192.168.1.1 -- 192.168.1.255 rangeu) koju kad ukucam u browser ne dobijem nista ?
Ima li neko ideju sto i kako?
Hvala