evo pa se igraj
http://h20566.www2.hp.com/portal/sit...tte.cachetoken
Cleaning the printer media path
If experiencing toner specks or dots on the printouts, clean the printer media path. This process uses a transparency to remove dust and toner from the media path.
NOTE: Do not use bond or rough paper.
Load a transparency in the priority input tray.
Make sure that the printer is in the Ready state.
Press and hold the GO button for 10 seconds, each of the three printer lights blink until the cleaning process is complete.
NOTE: If transparency film is unavailable, use plain paper, but it will be necessary to perform the procedure two or three times to ensure proper cleaning.