[tor]

Mislim da će ti ovo pomoći.





T220HD How To Exit Out Of Shop Mode

If your picture settings keep changing automatically, your monitor may be set to Shop Mode.
To remove your monitor from Shop Mode, follow these steps:

1. Press the Power button on your remote to turn the monitor on.
2. Press the Source button on your remote until Air or Cable is displayed.
3. Press the Menu button on your remote.
4. Press the Down Arrow button until you highlight Setup, and then press the Enter button.
5. Press the Up or Down Arrow button until Plug & Play is highlighted.
6. Press the Enter button to start the Plug & Play process.
7. On the first screen, press the Enter button to continue.
8. On the Language screen, press the Enter button. The screen displays several languages.
9. Press the Up or Down Arrow button to select the proper language. Press Enter to continue.
10. The next screen displays Store Demo and Home Use. Press the Left Arrow button to highlight Home Use. Press the Enter button to continue.
11. The next several screens deal with Auto programming, Time zone, etc. You can bypass these screens and configure them later if needed. Press the Menu button several times.
12. At the last screen, press the Enter button to complete the process.

Your monitor should now be set to Home Use. If it is not or your picture settings still change automatically, click the "Create Online Service Request" button below.