Evo stiga sam se malo pozabavit clockanjem grafe. Moja kartica je iz "druge ture" (nakon prvih 5000) gdje je Nvidia odlučila zabranit bilo kakvo petljanje u voltaže van dozvoljenih specifikacija. MSI se tome prilagodija kako sa karticama (BIOS) tako i sa Afterburnerom. BS ukratko.
Uglavnom da ne pišem:
Citiraj:
|
And then the really bad news ...
While I was writing this article I learned that NVIDIA just issued new BIOS files to the AIC partners and is frowning upon voltage tweaking outside their limitations. As such all new batches Lightning cards will have BIOSes where their limit of 1.175V is enforced, even in the LN2 BIOS. MSI has to follow that directive or probably face the fact that they will not be able to purchase the GPUs anymore. This as well includes setting restrictions in the new AfterBurner 2.2.3
So while everything as described above is possible it in the end means that only the first batch of 5000 cards will have an OLD Bios that is freed up from the limitation and thus allows voltage tweaking to a certain extent.
We do hope this point of view will change in the future allowing the AIC partners more flexibility. But for now you guys will have to face the fact that NVIDIA's 1.175V limitation is a solid fact. But sure, this news is a little bitter.
|
LINK na cijeli članak.
Postoji taj original stari "otključani" LN2 BIOS za skinit, kojeg sam prvog dana flasha ali problem je bija u afterburneru u kojem su isto tako ograničili max voltažu na
1.175V. I danas pronađem
post dotičnog Alexeya Nicolaychuka kreatora RivaTunera u kojem objašnjava jednostavan način micanja tog ograničenja u novoj
2.2.4 verziji Afterburnera.
Voltmetar to potvrđuje.
Evo max stabilan OC i rezultati:
Da je još 30mV možda bi i stabilna bila na 1400Mhz.