ajde ti probaj ovo samo probaj kažem. Ne košta ništa. A ljudi su u kombinaciji sa kumom+neke ploče imali problema sa naponom. Dakle odi u bios, i smanji voltažu procesora. Znam da glupo zvuči al istu stvar sam imao dok nisam to napravio. "Kuma" pod auto voltage stavlja "krivi napon". Primjer dolje:
Ako ovo ne šljaka mijenjaj napajanje. Napajanje je dosta staro.

" i had to manually set the cpu voltage to 1.2v as the board wanted to run at 1.325v on auto. the cpu runs fine at 2.8ghz and with the voltage set to 1.2v but if i adjust the clock multiplier ever to 2.9ghz i will get a blue screen. if i set the voltage to 1.25v and set to 2.9ghz the pc will boot and go into windows, but i know straight away the pc isnt liking it as my mouse pointer becomes a white pointer instead of the usual gold colour. if i then try to run 3dmark it will lock up. has anyone got any idea of why this isnt overclocking even by this small amount. thanks in advance for any replies.""