Evo molio bih malo pomoći oko spajanja
Linksys WRT54gc na Siemens gigaset sx 763, gnjavim se već danima pa nikako da ih spojim
ovo su postavke Linksys-a:
Postavke:
PPPoE
User: xxxx Pasword: xxxxx
Host name: gigaset.lan Domain name: gigaset.lan
MTU: Auto size 1492
Lokal IP address 192.168.5.2
Subnet mask: 255.255.255.0
DHCP Server: Enable
Starting IP Address: 192.168.5.100
Advanced Routing
Dynamic Routing (RIP) Enable
Static Routing Router Entries: 1 (gigaset.lan)
Enter Route name gigaset.lan
Destination LAN IP 192.168.5.1
Subnet mask: 255.255.255.0
Default Getaway: 192.168.5.1
Interface: Internet (WAN)
Routing Table:
Destination Mask Getaway Metric
192.168.5.0 255.255.255.0 192.168.5.2 1
192.168.5.1 255.255.255.0 192.168.5.1 2
192.168.5.2 255.255.255.255 192.168.5.2 1
a ovo su postavke Siemensa
Internet connection
Protocol: PPPoE, User: xxx, Pasword: xxx
MTU 1942, Line mode: Automatic, EncaPsulation: LLC, QoS: UBR, VPI/VCI: 0/86
24h reconnection: Off, Connection mode: Always on, UPnP: ON
Routing Of
Local network
IP address 192.168.5.1
Subnet mask 255.255.255.0
DHCP server ON
Lease time 1 day
First issued IP 192.168.5.2
Last issued IP 192.168.5.100
Default getaway 192.168.5.1
Domain name gigaset.lan
Pa ako ima neko kakvu ideju, dobro bi došla pomoć, unaprijed se zahvaljujem!
