[dulesbj]

Autor Vuco

Jok. Samo stavim browse as root kod paljenja, pokrenem skriptu i dalje pratim što me pita.

P.S. Sad više nisam ziher jer dugo nije bio mobitel kod mene, ali možda prije pokretanja skripte stavim da je ona kosturska glava zelena i onda opalim RUN i podesim skriptu.

Ovo za Favorite i to pojma nemam šta i kako i gdje.

Evo cijeli tutorijal za nju:

1. Download and Install the required apps (BusyBox + ScriptManager) to run this script.

2. Install BusyBox and select BusyBox version v1.16.2 or higher.

NOTE:
Reboot your phone after installation. This is optional but recommended specially if you are upgrading from a lower version of BusyBox.

3. Install Script Manager

4. Open Script Manager and grant SuperUser Access

• Tap on Menu > Advanced Options > Config
• Scroll down until you see Browse as Root
• Tap on it and press the back button to save
• Once again grant Script Manager SuperUser Access to save config
• Exit Script Manager

5. Open Script Manager and browse for V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf

• Tap on it and set properties to:

1. Favorites (Star Icon)
2. Root (Green Android Skull Icon)

• After setting properties, tap on Run to execute the script installer
• When executed, it will do initial test, be patient and wait for it to complete its tasks

II. SUPERCHARGER INITIAL SETUP

6. A bunch of text will start scrolling on your screen . . . and will ask you if
1. Home Locked in Memory?
· Type N for No and then press enter and another enter to continue to drivers console

7. First time SuperChargers will make a pit stop at Driver Options and set the following for Driver Options:

1. Scrolling Speed : 1 (Fast)
2. Use Build.Prop? : n (No) to use local.prop
3. Fix Emissions on Boot – just press enter to proceed
4. Run Fix Emissions on Boot? : y (Yes) to run Fix Emissions on Boot

This will fix app permissions to avoid force closes

5. Integrate? : y (Yes)
6. Disable Cool Animations? : y (Yes) to speed up execution of script

8. Press enter to return to drivers Console. Pressing enter will automatically run Quick V6 Cust-OOMizer and will calculate optimum SuperMinFree values

1. Apply SuperMinFree Calculator Settings? : y (Yes) to apply calculated MinFree values so you don’t need to choose from 512 HP, but if you wish to select between 5-7, you need to complete supercharger initial setup and then run supercharger and then select 5-7.

5. UnLedded (Multitasking){8,14,40,50,60, 75 MB}
6. Ledded (Balanced){8,14,55,70,85,100 MB}
7. Super UL (Aggressive){8,14,75,90,95,125 MB}

2. Press The Enter Key... – just press on enter key to continue. This action will backup Re-SuperCharger files to SD Card .
3.SuperClean & ReStart : y (Yes) to SuperClean & ReStart.

This will wipe your dalvik-cache and bootup time will take 1-2 minutes depending on the number of apps installed on your phone.

9. After restart, Open Script Manager and:

1. Go to /system/etc/init.d
2. Tap on S99SuperCharger and set the following properties:

• Favorites (Star Icon)
• Root (Green Android Skull Icon)
• Start on Boot (Gear Icon)

3. Tap on Save
4. Close Script Manager and Restart your phone

NOTE:
If you don’t follow step 9, you will get an error the next time you run the script and it will show you owner’s handbook on your default web browser.

III. BULLETPROOF LAUNCHER

10. After restart, open Script Manager and Run V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf, If you added it to favorites, tap on Menu > Favorites and then tap on V6_SuperCharger_for_Android-Update9_RC8.2.sh.pdf to run it and proceed in applying BulletProof Launcher:

1. SuperCharger will run Test Drive, just wait for it to finish and then continue to the Drivers Console.
2. On the Drivers Console select:

• 13 for OOM Grouping Fixes + BulletProof Launcher

3. BulletProof? : y (Yes) to apply BulletProof Launcher
4. Press Enter to go back to Drivers Console

IV. NITROLAG NULLIFIER

11. Back to the Drivers Console, select:

• 21. Nitro Lag Nullifier {Experimental}
• Enter (N)ullify, (U)n-Nullify, E(X)it: N (Nullify) to apply Nitro Lag Nullifier
• After applying Nitro Lag Nullifier, press enter to go back to Drivers Console.

V. ENGINE FLUSH

12. Back to the Drivers Console, select:

• 18. Engine Flush {ReCoupe RAM & Kill Lag}Continue and drop all file system caches? : y (Yes) to clear system cache on RAM
• After Engine Flush, press enter to go back to Drivers Console.

VI. SUPERCLEAN AND RESTART

13. Back to the Drivers Console, select:

• 30. SuperClean & ReStart {Wipe Dalvik & Reboot}
• Do you want to SuperClean & ReStart now? : y (Yes) to commence SuperClean and Restart

VII. VERIFY SUPERCHARGER STATUS14. After restart, Open Script Manager and run V6 SuperCharger again. You should see Supercharger Level: 100%

Samo tu su vrijednosti za samsung young,ali nema veze,ja stavljam pod broj 2 ili onaj mini free calculator,2 je multitasking za 256mb rama.