|
Extract primary loader [ OK ]
--> Validate secondary loader (FLASH) [ OK ]
-- Danube Secondary loader --
Version : 4_by_Delboy
Build Profile : sx76x_danube_b
Build Date : Jan 07 2012 - 16:00:00
--> Extract secondary loader [ OK ]
U-Boot 2010.03 (Jan 07 2012 - 15:17:53)
Board: Danube/Twinpass/Vinax-VE V1.5, DDR Speed 166 MHz, CPU Speed 333 MHz
DRAM: 32 MB
Flash: 8 MB
*** Warning - bad CRC, using default environment
Net: lq_cpe_eth
Hit any key to stop autoboot: 0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Failed to execute bootcmd (maybe invalid u-boot environment?), starting httpd to update firmware...
starting httpd server from server 192.168.1.1
http start
-->
Ma sve on uredno isčita... al neće zaustavit autoboot.
Code:
ROM VER: 1.0.3
CFG 01
Read EEPROMX
X
SHC Danube-External-Flash-Boot - Version V1.1
Mem-config:
Flash: 8MB- 8MBx1
Ram: 32MB-32MBx1
Low level dbg is active...
CPU0
MEMS
ROM VER: 1.0.3
CFG 01
Read EEPROMX
X
SHC Danube-External-Flash-Boot - Version V1.1
Mem-config:
Flash: 8MB- 8MBx1
Ram: 32MB-32MBx1
Low level dbg is active...
CPU0
MEMS
-- Danube Primary loader --
Version : 4.1.24.52.12
Build Profile : sx76x_danube_b
Build Date : Sep 9 2009 - 17:53:25
--> Extract primary loader [ OK ]
--> Validate secondary loader (FLASH) [ OK ]
-- Danube Secondary loader --
Version : 4_by_Delboy
Build Profile : sx76x_danube_b
Build Date : Jan 07 2012 - 16:00:00
--> Extract secondary loader [ OK ]
U-Boot 2010.03 (Jan 07 2012 - 15:17:53)
Board: Danube/Twinpass/Vinax-VE V1.5, DDR Speed 166 MHz, CPU Speed 333 MHz
DRAM: 32 MB
Flash: 8 MB
*** Warning - bad CRC, using default environment
Net: lq_cpe_eth
Hit any key to stop autoboot: 0
Wrong Image Format for bootm command
ERROR: can't get kernel image!
Failed to execute bootcmd (maybe invalid u-boot environment?), starting httpd to update firmware...
starting httpd server from server 192.168.1.1
http start
|