Citiraj:
Autor MujagaWudakhi
pozdrav.... također imam monitor SyncMaster 2470 LHD.... isto imam problem kao i ti, bar tako mislim... posjedujem Lenovo IdeaPad y560 sa ATI 5730 mobility grafickom , sto je stvarno oke graficka za laptope i kada spojim preko VGA porta monitor 1920 1080 izgleda perfektno... no , kada spojim preko HDMI-a ta rezolucija izgleda stravicno... slova kao da imaju bijele okvire, presvijetla slika, izgleda stvarno odvratno, no kad , spustim rezoluciju na 1680 1050 slika izgleda odlicno.... sad mene brine, da li je stvar u firmwareu, hdmi kabelu , driverima graficke ili necem destom...
ako netko moze pomoci... bio bih zahvalan...
lp
niksa
|
Evo rijesenje koje je meni pomoglo
HDMI Signal to Samsung P2470HD worse than DVI- how does that work?
I have a Samsung LN40B750 so I might be able to help. Try this troubleshooting:
1. Press Source on your TV remote
2. Highlight the HDMI port your comp is connected to.
3. Press the tools button on the TV remote
4. "Edit Name" should be selected automatically, so just press the enter key on the TV remote (the box with a right angle arrow)
5. The HDMI input connected to your comp should be highlighted automatically, so just press enter again.
6. Highlight "PC" and press enter.
7. Press exit.
7. Let me know if this fixed the issue.
INFO: changing the source name lets the TV know what kind of signal input it should be expecting. You will notice there is large selection for every type of device you may connect to it. This is the reason for the TV having so many HDMI ports, as you can have each port programmed to a specific type of input, so you don't have to keep swapping ports and changing the source type (I don't know why they call it "source name", I guess that's what happens when you translate to engirsh.)
IZVOR:
http://forum.notebookreview.com/sage...ml#post5649734