View Single Post
Staro 16.05.2011., 20:41   #15
tech
Premium
Moj komp
 
Datum registracije: Aug 2007
Lokacija: Zagreb
Postovi: 1,687
Zašto misliš da si sa /d komandom išta napravio?(uho na disk i osluhni jel klikne nakon par sekundi idlea)

Ljudi kažu da to samo resetira tajmer na 6 ili 9 sekundi.
Kao što je primjer kod mene...

WD support odgovara ovako na moju brigu o load ciklusima:

Citiraj:
I am sorry to hear you are having problems with your EARS drive. As our GP drives are tested to over a million LLC there are no problems with the count that you are seeing, this is explained in the guide below:

Answer Title: The S.M.A.R.T Attribute 193 Load/Unload counter keeps increasing on a SATA 2 hard drive
Answer Link: http://wdc.custhelp.com/app/answers/detail/a_id/5357
Na drugo pitanje, može li disk uzrokovati havariju mog hipotetskog RAIDA zbog velikog LCC-a
Citiraj:
I would recommend considering upgrading your drives to our enterprise models to ensure that your RAID is as stable as possible
Neki čiča na drugom forumu kaže ovo:

Citiraj:
/D sets the timer to 9.6 seconds and doesn't disable it...
/S0 says "timer is disabled" but it's not, the Load Cycle Count increases by 20 per min.
/S12 sets the timer to 12 seconds, (head parks about once per min)
/S12.7 to /S300 (and everything inbetween) causes an issue with the drive and windows wont boot up no matter what I try.
i...

Citiraj:
It seems /d, which should disable the timer, does different things to different firmware revisions, on some it does disable the timer, on others it sets the timer to 9.6 seconds, or 6.3 seconds depending on which version of wdidle3 you're using..
Kod mene je sada stavljeno na 5 minuta, dobijem oko 2-10 load ciklusa po danu.
Potrošio sam 2 dana na ovo i nemam više živaca baviti se sa time, ak misli krepat neka krepa do 2013.
tech je offline   Reply With Quote