Da nije javljao grešku da je na 40pinskom kabelu umjesto 80.
Usput ovo ti je opis za tu grešku:
Low value of this attribute typically indicates that something is wrong with the connectors and/or cables. Disk-to-host transfers are protected by CRC error detection code when Ultra-DMA 66 or 100 is used. So if the data gets garbled between the disk and the host machine, the receiving controller senses this and the retransmission is initiated. Such a situation is called "UDMA CRC error". Once the problem is rectified (typically by replacing a cable), the attribute value returns to the normal levels pretty quick.
Ako si zamjenio kabe i stavio na drugi kontroler imaš 2 mogučnosti, ili nevalja kontroler ili nevalja hard.
Ili posudi od nekog neki hard pa isprobaj ili odnesi svoj hard na drugi PC samo te 2 opcije ti preostaju