Prati daljnje upute, i meni je zaštekao pa sam moram napraviti upgrade bootloadera:
Malo su zasrali stvar s ovim svime, vidi da dosta ekipe ima problema. Da, obavezno napravi format sticka s ovim HP programom, iskopčaj HDMI kabel prije flashanja (upotrijebi composit priključak).
For those who are having problems with the update
The reason that the install is not working is that the Bootloader did not update
FIX
1) download http://www.chip.de/downloads/HP-USB-..._23418669.html
2) Use the utility to formatt your USB Flash Drive to FAT32
3) Install the firmware again
4) If the above does not work please try another USB Flash Drive
If the above does not work for med500X then try the following
MED500X ONLY
Pls try a few times and if it still does not update the bootloader then you will need to do the 17L Bootloader Patch procedure
http://www.mede8er.org/public_beta/0...ader_patch.zip
Instructions for updating from Bootloader 17L
a) Download 0017L_bootloader_patch.zip
b) Unzip the file 0017L_bootloader_patch.zip and you will find 2 files inside.
install.img and install.dat
c) Copy these files to the root of a USB drive
d) Install via Emergency Procedure.
--- On the first stage you will see the patch install on the screen
--- then the Mede8er will reboot
--- Next you will see BETA2 install on screen and a yellow box after half of progression bar stating it has to reboot
--- then another reboot
--- then again it starts to install BETA2 and finishes with install complete and reboots
THE PROCESS IS NOT COMPLETE SO PLEASE CARRY ON
e) Delete the two files install.dat / install.img on the USB stick
f) Unrar/Unzip the file (Depends on your requrement)
MED500X_V4_INC_HD_AUDIO_25Jan2011 or
and copy the install.img to the root of the USB stick.
g) Update the Mede8er in the normal way via Emergency procedure
Please be patient as the update from 17L is much longer that the normal firmware update.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
INFO UPDATE 28 Jan2011
If you have tried all the above and only get the E8E loading screen then we suggest you use V4BETA5 as a Bootloader updater. Some users have noted that unplugging the HDMI cable before the update process and using the Composite Output (yellow) worked for them ---- so this is something also worth trying.
Step 1
We suggest you first format your USB Stick with this utility
http://www.chip.de/downloads/HP-USB-..._23418669.html
Step2
Important -- you must first install V4BETA5
USE THE EMERGENCY INSTALLATION PROCEDURE ONLY
http://www.mede8er.org/public_beta/M...ember_2010.zip
After installation check that the Mede8er is working correctly then reboot and go to Step 3. If the V4BETA5 did not install correctly we suggest your re download the firmware and use another USB Stick and start off at Step1
Step3
Install V4
USE THE EMERGENCY INSTALLATION PROCEDURE ONLY
MED500X
Recommended for users who use HDMI audio
http://www.mede8er.org/beta/Firmware..._25Jan2011.zip
Recommended for users who use SPDIF audio
http://www.mede8er.org/beta/Firmware..._25Jan2011.zip
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Update the Mede8er in the normal way via Emergency procedure
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
MED500X_V4_NO_HD_AUDIO_25Jan2011