Pokrenuo sam sensors-detect i svugdje kada me pitalo nesto stisnio sam enter osim kada me pitalo ocu ISA/smbus izabrao sam smbus.
Onda sam u file /etc/modprobe.conf.local dodao:
#I2C module options
alias char-major-89 i2c-dev
A u file /etc/rc.status sam dodao:
# I2C adapter drivers
modprobe i2c-i801
modprobe i2c-isa
# I2C chip drivers
modprobe eeprom
modprobe w83627hf
/usr/bin/sensors -s
I nakon restarta kada sam pokrenio sensors dobio sam ovo:
eeprom-i2c-1-52 Adapter: SMBus I801 adapter at 0400 Memory type:
DDR SDRAM DIMM Memory size (MB): 256
eeprom-i2c-1-50 Adapter: SMBus I801 adapter at 0400 Memory type:
DDR SDRAM DIMM Memory size (MB): 256
w83627thf-isa-0290 Adapter: ISA adapter
VCore: +1.63 V (min = +1.93 V, max = +1.93 V)
+12V: +12.16 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.36 V (min = +3.14 V, max = +3.47 V)
+5V: +5.07 V (min = +4.75 V, max = +5.25 V) -12V: -14.91 V (min = -10.80 V, max = -13.18 V)
V5SB: +5.16 V (min = +4.76 V, max = +5.24 V)
VBat: +0.16 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 1278 RPM, div = 32)
CPU Fan: 0 RPM (min = 21093 RPM, div = 2)
fan3: 2057 RPM (min = 42187 RPM, div = 4)
M/B Temp: +23°C (high = +8°C, hyst = +4°C) sensor = thermistor
CPU Temp: +20.5°C (high = +80°C, hyst = +75°C) sensor = thermistor
temp3: -48.0°C (high = +80°C, hyst = +75°C) sensor = thermistor
ERROR: Can't get VID data!
alarms: beep_enable: Sound alarm enabled
E sad sta mu znaci: ERROR: Can't get VID data!
Kako da je VBat: +0.16 V ?
I kako je: CPU Fan: 0 RPM
I sta mu je: temp3: -48.0°C
:confused: :confused: