Citiraj:
Autor Face_Off
ako to iskljucim sta nece radit pod maks brzinom vent?
|
Manual str. (56/57).
Citiraj:
CPU Smart FAN Control
Enables or disables the CPU fan speed control function. Enabled allows the CPU fan to run at different speed according to the CPU temperature. You can adjust the fan speed with EasyTune based on system requirements. If disabled, the CPU fan runs at full speed. (Default: Enabled)
CPU Smart FAN Control
Specifies how to control CPU fan speed. This item is configurable only if CPU Smart FAN Control is set to Enabled.
Auto Lets the BIOS automatically detect the type of CPU fan installed and sets the optimal CPU fan control mode. (Default)
Voltage Sets Voltage mode for a 3-pin CPU fan.
PWM Sets PWM mode for a 4-pin CPU fan.
Note: The Voltage mode can be set for a 3-pin CPU fan or a 4-pin CPU fan. However, for a 4-pin CPU fan that is not designed following Intel PWM fan specifications, selecting PWM mode may not effectively reduce the fan speed.
|
Citiraj:
Autor Face_Off
al evo ni brzina proca nije kako triba - kad palim komp prikaze mi brzinu 4x2.80Ghz a mnozitelj je 20x133 2,67 GHz koliko je default i koliko prikaze u Win.... dok u Everestu prikazuje 3,1-3,2 (sto je isto normalno jer je turbo mod tad vjerovatno on)...
nikako da covik bude pametan! jos cu na kraju vratit na f3 bios i trpit onu povecanu strelicu misa!
|
Puno puta spomenuto o tome po forumu..
U bios-u MB Intelligent Tweaker(M.I.T.) -> Advanced Frequency Settings -> Advanced CPU Core Features -> disejblas C1E i EIST funkciju..
Sve u manualu str. (37, 38 i 39).
PS.Citaj manual!