[ti.le]

da, i meni je bio u postavkama na iskljuceno, sto ne znaci da ga nema, instaliraj neki taskmanager i pogledaj da li pod procesima imas tsrautostart.exe...

misim da je ovak nekako funkcioniralo da ga iskljucis za stvarno:

Hello,

I had a same problem; every time I run Garmin and close it, it is necessary to kill TSRAutostart.exe. I have found a working solution on other forum, tried it, and it is really working:


After installing v5.0.0.x0:

Turn OFF your S60
Turn S60 back ON
Launch JBak Taskman to see if TSRAutoStart.exe is running in Memory in Menu -> Tools -> Processes even though it's set as DISABLED by default in Tools -> Settings -> System -> Launch Background Services.


If TSRAutoStart.exe is running after S60 is turned ON, do this:

START GarminMXT v5.0.0.x0, goto Tools -> Settings -> System -> Launch Background Services and change to ENABLED.
EXIT GarminMXT, re-start GarminMXT and goto Tools -> Settings -> System -> Launch Background Services and change to DISABLED
Turn OFF S60
Turn ON S60
Launch JBak TaskMan to check that TSRAutoStart.exe ISN'T in Menu -> Tools -> Processes

Now:

START GarminMXT v5.0.0.x0
EXIT GarminMXT
Launch JBak TaskMan to check that TSRAutoStart.exe ISN'T in Menu -> Tools -> Processes

Now, you should find:

TSRAutoStart.exe doesn't start when you first turn ON your S60
TSRAutoStart.exe now CLOSES automatically when you exit GarminMXT v5.0.0.x0
It appears that GarminMXT v5.0.0.x0 when being installed, doesn't create the DISABLED entry and has to be done manually by setting to ENABLE, then DISABLE.

odavde:

http://www.symbian-freak.com/forum/v...28453&start=20