Citiraj:
Autor dh41400
# Temperatures
# For CPU revisions F and G, according to AMD's "Revision
# Guide for AMD NPT Family 0Fh Processors", "The internal
# thermal sensor ... is inaccurate". This may be the reason
# for many reports of k8temp giving absurdly low CPU core
# temperatures and for there being no generally accepted
# computation to derive actual temperature from the raw data.
# The workaround is to ignore core temperatures and use the
# CPU case temperature as was done before core temperatures
# were available. On this motherboard the CPU case temperature
# is reported by the it8718 chip's temp2 (see above).
# For CPU revisions other than F and G, the proper use of
# k8temp temperatures may be to compute an average for each
# core rather than to report two temperatures for each core.
# For a sample computation see mingus' posting at
# http://forums.opensuse.org/archives/...ml#post1793098
# If you don't trust the readings, you might as well not load
# the k8temp driver (which, in practice, means blacklisting it,
# as this driver auto-loads on most systems.
Ostatak je ovdje.
|
Thanks, imam odvojeni mjerač temperature sa Scythe Kaze Master priljepljen na bazu coolera i daje par stupnjeva veće temperature za CPU, dok su ostale (za GPU) usporedive.
Druga jezgra ima apsurdne rezultate (20C).
Mislim da su realne temperature +5C od onoga što javlja matična.
Ubacio sam četvrti ventilator u vrh kućišta (iznad CPU-a), ali moram priznati da nema nikakve razlike...
@DomagojX no comment
