službeni odgovor filipsa kad sam ja to rješavao
With regards to your query we can advise that you upgrade software with the
latest corrected version 000.064.072.000 from 2009-01-16, which is available
on our website
If the above action does not help, you may try resolving the problem by
changing the country selection in the TV menu to ‘CZECH REPUBLIC’ and then
perform the auto installation again.
In this case you need to take the following steps follow these steps to
change the country setting and reinstall the channels:
1. Reset the TV by unplugging it from the power outlet for 30 seconds.
2. Turn on the TV.
3. Press the 'MENU' button on the remote control to access the main menu.
4. Select TV MENU and press the cursor right to access the submenu.
5. Select INSTALLATION and press the cursor right to access the installation
menu.
6. If the Child lock is activated, the screen will prompt you to enter your
pin code. If you have forgotten your pin code, refer to the FAQ (I have
forgotten my 4-digit access code. How can I reset it?).
7. Press the cursor down to select CHANNEL INSTALLATION and press the cursor
right to access the channel installation menu.
8. Select AUTOMATIC INSTALLATION and press the cursor right to START NOW.
9. Press the 'OK' button to access the country menu.
10. Press the cursor up/down to select CZECH REPUBLIC and press the green
button to confirm.
11. Press the green button to start the installation.
12. Once the installation is completed, press the red button to return to
the channel installation menu.
13. Press the 'MENU' to exit the menu.
BEZ BRIGE , DALJE OD UPDATE FIRMWARE-a NEBUŠ IŠAO ;-)