Uzeh ja taj Seagate ST3500320AS (firmware SD15) prije nekih 2 tjedna, disk je od onda cijelo vrijeme u funkciji, sad je trenutno cca 80% popunjen, sve 5, em brzo radi em je tih u radu ali ipak me zanima jedna stvar. Naime speedfan mi pronalazi slijedece nepravilnosti u SMART-u
NOTE : your hard disk has 2 pending sectors. Those are sectors that couldn't be properly read and that the hard disk logic is waiting for a write operation to try to remap to a spare sector (if available). According to the Reallocated Sector Count attribute, your hard disk seems to have available spare sectors. A simple disk surface scan won't be enough to force the remap operation. You need a read/write surface scan to remap the sector. The best option should be a tool that knows about what should be read from that sector so that it has some option to apply the best fix to the missing data.
NOTE : your hard disk has 2 offline uncorrectable sectors. Those are sectors that an offline scanning found as unreadable. Offline scanning is a process that can be automatically started by the hard disk logic when a long enough idle period is detected or that can be forced by some tool. Those unreadable sectors are identified and the hard disk logic is waiting for a write command that will overwrite them to try to remap them to spare sectors (if available). According to the Reallocated Sector Count attribute, your hard disk seems to have available spare sectors. A simple disk surface scan won't be enough to force the remap operation. You need a read/write surface scan to remap the sector. The best option should be a tool that knows about what should be read from that sector so that it has some option to apply the best fix to the missing data.
The overall fitness for this drive is 92%.
The overall performance for this drive is 92%.
Scandisk (ne surface) nista ne pronalazi na disku te kaze 0 bad sectors.
Sad ja Vas pitam ovako dali je to sto speedfan (a i EVEREST) pronalaze u SMART statusu alarmantno ili je to nesto sto mogu komotno zanemariti?
Na disku mi je velika kolicina podataka koju nemam gdje sad trenutno dalje pohraniti pa mi jako nezgodno ponovno formatirati hdd i raditi surface scan, a napomenio bi da sam ga tek kupljenog formatirao sporim formatiranjem i da nisam zapazio tu gresku, sta mi je najbolje ciniti?
Imam i jos jedan Seagate u tom racunalu ST3320620AS oko godinu dana star i nema te errore u SMART statusu.
Jos jedno pitanje u vezi ST3500320AS, zasto nemogu u device manager-u pod stavkom disk drives - doticni disk - properties - polices - enable write cashing on the disk, ne mogu to ukljuciti za taj disk, uvijek kad se vratim je bez kvacice???
Dok za ST3320640AS mogu to ukljuciti.
Dali to ima veze mozda sa kontrolerom posto sam ST3500320AS spojio na ICH7 koji je u RAID0 nacinu rada te gura i jos 2 Raptora (dakako ST3500320AS nije member disk dok raptori jesu), za razliku od ST3500320AS koji je spojen na dodatni kontroler na ploci Asus P5WDH Deluxe (Jmicron)?
Eto to su neke stvari koje me muce u vezi diskova u mojem racunalu pa bi volio da mi pomognete.