"I calibrated the screen using the LaCie Blue Eye Pro software package and hardware colorimeter. During the process, the OSD settings were adjusted, forming a small part of the overall calibration proceedings. Brightness was adjusted down to a value of 17, contrast was reduced to 65, and RGB values were changed to 251, 235 and 242 respectively. The calibration process then automatically makes adjustments at a graphics card Look Up Table (LUT) level, before creating and activating an ICC profile. There is no hardware level LUT correction with the LP2475W, which some premium colour critical screens in this sector do offer. Immediately to the naked eye you could feel the difference, with the main obvious adjustment being the far more comfortable and sensible luminance setting. Colours also looked more even to the naked eye."
Posto neznan sta tocno znaci ovaj podebljani dio teksta, odnosno sta se tu tocno desava jer neman puno iskustva s kalibriranjem monitora (jedanput san koristio spydera 3 na laptopu), zanima me sta bi se desilo kad bi ja rucno namistio postavke na tom istom monitoru kakve su oni dobili kalibracijom, ali bez upotrebe kalibratora:
Brightness: 17
Contrast: 65
RGB: 251, 235, 242
Ocito je da se nesto i kod graficke kartice prominilo ali neznan koliko to utjece na cjelokupan proces kalibracije. Ima li netko iskustva s tim?