[thopok]

ali oni su preveliki (5MB i 13MB) pa ne stanu na disketu.

Nisu. Nalaze se u System & Chipset Drivers zip-u.

The following details that installation of the drivers while installing new Windows XP/2000. This method don’t be supported for new Windows Me/98SE installation.

1. Start the installation:
   Boot from the CD-ROM. Press F6 when the message “Press F6 key if you need to install third party SCSI or RAID driver” appears.
2. When the Windows XP/2000 Setup window is generated, press S key to specify an Additional Device(s).
3. Insert the driver diskette into drive A: and press Enter.
4. Choose one of the following items:
   “WinXP SiS Raid/IDE Controller “,
   “Win2000 SiS Raid/IDE Controller”,
   that appears on screen, and then press the Enter key.
5. Press Enter to continue with installation or if you need to specify any additional devices to be installed, do so at this time. Once all devices are specified, Press Enter to continue with installation.
6. From the Windows XP/2000 Setup screen, press the Enter key. Setup will now load all device files and then continue the Windows XP/2000 installation.
7. Please install the driver package again (ex. SiS RAID driver v1.02) while the operation system has been setup.