06.07.2008., 17:48
|
#3
|
|
Guest
Datum registracije: Jun 2008
Lokacija: Splity
Postovi: 3,003
|
Citiraj:
|
After routing settings are finished, if you want to enable DHCP service, then please set IP address of PC network card to obtain an IP address automatically. If you don’t want to enable DHCP service, then you need to assign an IP address for your PC network card and set DNS address to the address provided by operator (If operator doesn’t provide the DNS address, then the address is set to 192.168.1.1 that is the address of ROUTER).
|
Citiraj:
|
drugi stoji na onome da vertificira username i pw,te enakon 10sec kaže da se nemože spjiti na internet.
|
A kad koristiš PPPoE konekciju kreiranu u Windows-ima za koju nema potrebe u routing mode-u.
Citiraj:
| 1. | Click Start, and then click Control Panel. | | 2. | Click Network and Internet Connections. | | 3. | Click Network Connections. | | 4. | Right-click Local Area Connection, and then click Properties. | | 5. | Click the General tab, click Internet Protocol (TCP/IP) in the This connection uses the following items list, and then click Properties. | | 6. | In the Internet Protocol (TCP/IP) Properties dialog box, click Obtain an IP address automatically (if it is not already selected), and then click OK. |
|
Zadnje izmijenjeno od: thopok. 06.07.2008. u 18:53.
|
|
|