Ili nek proba neku stariju verziju...

Ili probaj sa npr. IntelBurnTestom koji isto koristi Linpack za testiranje CPU-a. Ovo ti može biti radi svega, od samog OCCT-a do Windowsa/proca.

Uostalom, n4d44 ti je dobro rekao. Smanji takt pa vidi jel će opet ili ne javiti taj error.

kolko "smeca" imas instalirano gore nije ni cudo da ne radi.

Hvala, radi sve perfektno, samo sam malo povecao voltazu procesoru.

Pozz

OCCT 3.0.0 beta 22

Changelog :

* The OCCT Test now executes as a separate process
* The bug known as "-1 core detected" is gone
* Monitoring/system info engine updated
* Linpack 32 bits test now works with systems with more than 4GB of memory - max mem considered is 1.44GB (universal value)
* The power supply test now works everywhere as well
* GPU:Memtest has been GREATLY updated : 6 thorough tests have been implemented, and they are EXACTLY the same as Memtest86+. One pass is takes much, much longer though (i'd say about 10 minutes). But the efficiency is now much better. Remember, you need a geforce 8 or later cards.

OCCT 3.0.0 Final

Changelog (Since 2.0.1) :

MAJOR FEATURES

* OCCT's main UI has been completly revamped
* Graphs now shows a 2nd line showing the CPU usage / FPS during the test.
* CPU usage is now instantaneous instead of an average since the start of the test
* OCCT now has 5 different tests. The descriptions are at the end of the changelog

USER INTERFACE

* Entirely revamped - now based on tabs, and completly modular
* Now has a small help module - just move your mouse around OCCT's window, you'll see

MONITORING

* The built-in engine has been updated - lots of new hardware are now supported
* Alot of bugs are fixed, included the famous "3 cores out of 4 detected"

GRAPHS

* Graphs now shows a second line showing the CPU usage/FPS during the test
* A legend explains everything
* The test configuration is now entirely present in the graph's subtitles

TESTS DESCRIPTION

CPU:OCCT

* The original, inherited from previous versions of OCCT
* Now Core i7 compatible
* Optimized

CPU:LINPACK

* The very same as IntelBurnTest, based on a test provided by Intel
* It will make your CPU hotter than never !
* 32 and 64 bits support

GPU:3D

* Home-made test written in Direct3d that will make your GPU really hot - this test is similar to ATITool and Furmark (thanks to Furmark and JegX for his support and for the aborted partnership )
* Will make your graphic card real hot - especially the GPU
* Has an error detection mode similar to ATITool
* SLI and Crossfire support (Just enable Fullscreen mode !)

GPU:Memtest

* Again, Home-made test written in CUDA that'll launch a MemTest86 or MemTest86+ like test on your Graphic card memory and report any error found
* Requires a Nvidia Graphic Card, and a GeForce 8 or Higher !

Power Supply

* Dedicated to power supplies - it'll launch GPU:3D and CPU:LINPACK at the same time to load your power supply. BEWARE, THIS TEST IS REALLY DEMANDING !
* WARNING, DO NOT USE THIS TEST WITH NO-NAME POWER SUPPLY, AS A FEW DEATHS HAVE ALREADY BEEN REPORTED !
* This tests demands 30 to 40% more power than crysis on a quad-core system with an SLI graphic system installed...

probam vrtit gpu test sa error control i valjda svaki frame izbaci error, a framerate padne sa 58 na 15ak.

normalno?

OCCT 3.0.1

Changelog (Since 3.0.0) :
GPU:MEMTEST
* Now compatible with GeForce cards with more than 512MB under Vista (A Cuda bugs was encountered, but i found a workaround)
* Now 4 times faster (thanks to a switch to Cuda 2.1 which came with bugfixes in the SDK - new prerequisites though)
* The test cannot be run on GeForce 7 or lower anymore

MONITORING
* OCCT now saves monitoring sensor based on sensor names when available, not on position in a list. Thus, when a sensor disappear, OCCT configuration is preserved
* Engine has been updated - new CPU support,...
* the maximpum CPU temp can now be set at a temp higher than 99°C (before, it could be done, but it was reset upon reloading OCCT at 80°C)

TRANSLATION
* Arabic and Romanian support have been added
* Italian have been updated

OCCT REQUIREMENTS
* Up-to-date DirectX9 (Under Vista, DirectX 10 and 9 are updated separatly) for GPU:3D and Power Supply
* Nvidia Drivers 181.22 or later for GPU:MEMTEST (Now based on CUDA 2.1,as several critical bugs have been fixed in this release).

http://www.ocbase.com/perestroika_en...iel-v3.0.1.png

Update:

OCCT 3.1.0

Evo nakon duzeg vremana izasla je nova verzija occt

http://www.ocbase.com/perestroika_en/index.php?Download

http://img694.imageshack.us/img694/1...enofficiel.jpg

Smanji tu sliku ili u thumb!

Verzija 12 je vani

OCCT 12.1 : Ground-breaking 3D test for everyone, innovative CPU Core cycling test, Latency/bandwidth benchmark ( free as well ! ), and A100/H100 testing

https://www.ocbase.com/download