PC Ekspert Forum - Informacije, testovi i recenzije zračnih i vodenih hladnjaka

Stranica 6 od 18

Show 40 post(s) from this thread on one page

PC Ekspert Forum (https://forum.pcekspert.com/index.php)

- Hlađenje (https://forum.pcekspert.com/forumdisplay.php?f=63)

- - Informacije, testovi i recenzije zračnih i vodenih hladnjaka (https://forum.pcekspert.com/showthread.php?t=222183)

Dottore

02.11.2011. 19:50

Noctua Presents NH-D14 Special Edition for LGA2011

Citiraj:

Noctua's award-winning NH-D14 heatsink features a 6 heatpipe dual radiator design that provides more surface area, better heat-distribution and superior airflow efficiency than conventional tower style heatsinks. Developed to provide ultimate quiet cooling performance in dual fan mode, the NH-D14 is renowned to be among the best premium-grade CPU coolers available.

http://tpucdn.com/img/11-11-02/12a_thm.jpg http://tpucdn.com/img/11-11-02/12b_thm.jpg http://tpucdn.com/img/11-11-02/12c_thm.jpg http://tpucdn.com/img/11-11-02/12d_thm.jpg

Izvor : techpowerup
Službeni : Noctua

Za postojeće vlasnike NH-D14 postoji NM-I2011 mouting kit. Prije se moglo na nekim modelima moglo dobiti besplatno a sada valjda se plaća

Pupo	02.11.2011. 19:56

Piše da se neplaća ali je potrebno imati Noctua hladnjak i ploču ili procesor.

"Owners of Noctua CPU coolers can obtain the NM-I2011 Mounting-Kit free of charge via this form. A proof of purchase (photo, scan or screenshot of the invoice) of both a Noctua CPU cooler and either a socket LGA2011 mainboard or socket LGA2011 CPU are required.
"

Dottore

02.11.2011. 19:58

Istina. Samo je pitanje hoće li to upaliti.
Isto možeš poslati tuđu fotografiju i pomoliti da nasjedaju na foru.

xtreme96

02.11.2011. 21:20

I onda kad im 50 ljudi minimalno posalje istu sliku onda bude sranje :D

NH-D14 bi najvise volio imat u svom kucistu...Hladnjak koji mi se najvise svidja..Jedina stvar koja mi je odvratna na Noctuama je bijelo-smedji ventilator,to odma ide u crno ako se mene pita....pogotovo ako se ima kuciste s prozorom...

MafiaMan

05.11.2011. 01:12

http://www.guru3d.com/article/zalman-cnps-12x-review/

Ipak mozda nije toliko los. Cekan jos druge rw-e
Ja sam trenutno u dvojbi izmedju njega i H100 ..

Sn4k3

05.11.2011. 08:57

Nebi ja stavlja Cnps12x i H100 u isti kos, koliko god se cinilo da zalman ima dobre performanse..
Valjalo bi definitivno pricekati ostale reviewe, no ako mislis izdvojiti toliku svotu novca na hladjenje,
radije uzmi H100. Svakako prije toga provjeri dali ti moze stati u/na kuciste...

Pupo	05.11.2011. 09:02

Ja bi definitivno išao na H100 ako već misliš potrošiti tu sumu novaca!

MafiaMan

06.11.2011. 12:55

evo jos jedan

http://www.benchmark.pl/testy_i_rece...ona/15695.html

U slusaju da iden na H100 , onda ide i 650d kuciste ... U suprotnom zalman i fractal.. Pokusavam opravdat cjenu 650d naspram fractala ali mi neide, lol :)

Pupo	06.11.2011. 13:02

Koji fractal? Zašto mora H100 i cors kućište?

MAGARAC

06.11.2011. 14:09

http://www.youtube.com/watch?v=Ik4jx...eature=related

Ovdje se Zalman bas nije dobro proveo i treba racunat na veliki problem sa memorijom.

JuiceBox

06.11.2011. 14:42

Ni meni taj kuler nije nist posebno, silver arrow i d14 su puno bolji double tower hladnjaci.

Sn4k3

06.11.2011. 14:57

Meni zalman izgleda bolje nego itjedan double/single tower hladnjak i odaje jako dobru kvalitetu izrade baze i opcenito cilog hladnjaka..
Na stranu dobre performanse, cijena, kompatibilnost i ugradnja aftermarket ventova su presudne karakteristike u vecini slucajeva kod vecine ljudi...

MafiaMan

06.11.2011. 15:18

Citiraj:

Autor Pupo (Post 2018851)

Koji fractal? Zašto mora H100 i cors kućište?

Fractal R3 ili XL
Jer ciljam na sto optimalnije i tise hladjenje + volin kad sve to izgleda uredno . U koje se jos kuciste H100 da namontirati ?

U vezi ovog YT review-a.... na guru3d forumu je lik navea razlog zasto ovaj nije dobia dobre rezultate . Ako cooler najnormalnije funkcionira u guru3d polozaju onda nevidim bas problem sa clearance-om , tj to mu postaje i jedna od prednosti..

Pupo	06.11.2011. 15:21

Koji fractal planiraš kupiti? :)

Citiraj:

Autor MafiaMan (Post 2018969)

Jer ciljam na sto optimalnije i tise hladjenje + volin kad sve to i izgleda uredno . U koje se jos kuciste H100 dade namontirati ?

Ovo tiho i uredno ovisi samo jednim dijelom o kućištu, a većim o tome kakvi se koriste ventovi, koliko ih je i sl. Jer nema kućišta koje će utišati glasan vent, a pogotovo ne više njih!

MafiaMan

06.11.2011. 15:33

Citiraj:

Autor Pupo (Post 2018972)

Koji fractal planiraš kupiti? :)

Ovo tiho i uredno ovisi samo jednim dijelom o kućištu, a većim o tome kakvi se koriste ventovi, koliko ih je i sl. Jer nema kućišta koje će utišati glasan vent, a pogotovo ne više njih!

edit-a san post gore :)

A znam , ali po slikama sto san vidia na netu ...u kakvo se stanje corsair da dovesti , to me privlaci njemu + h100 se savrseno uklapa u njega. Nikako nevolin koncpet ovih 1kg hladnjaka :) .Kad to slozin onda cu vidit koliko je sve to bucno/tiho , pa nije problem uloziti u ventove ili pak nekakv potencimetar koji ce bit skriven unutar kucista

Doink the Clown

07.11.2011. 09:27

Cooler Master Announces LGA2011 Bracket Free Upgrade Program

Citiraj:

Cooler Master, an industry leading chassis, thermal solution, peripheral, and accessory manufacturer today extends its support for its customers. As was previously announced, Cooler Master is providing a free bracket to support LGA2011 on the Hyper 212 EVO. This will now be extended to one of Cooler Master’s best-selling CPU Coolers. Loyal owners of the award-winning Hyper 212 Plus need not worry as this offer covers the Hyper 212 Plus as well.

Support will continue to grow for other Cooler Master CPU Coolers. To be notified when new CPU Coolers brackets are available through this program or CM Store, please sign up for the Cooler Master Newsletter.

To Obtain a Bracket Upgrade:
A free LGA2011 bracket will be provided to those that purchased a Hyper 212 EVO/Plus before the inclusion of this bracket in the product packaging.

Visit our parts request page here
Be ready to provide one of the following options:o Heatsink serial number and an invoice for a LGA2011 motherboard or processor
o Heatsink serial number and a picture of your new LGA2011 motherboard or processor

For more information, visit this page.

http://tpucdn.com/img/11-11-07/28a_thm.jpg

http://www.techpowerup.com/154755/Co...e-Program.html

Pupo	07.11.2011. 13:18

A što Intel truje s tim "standardima". Opet će biti par mm razlike između rupa i sad odma novi mounting kit.

Citiraj:

Autor MafiaMan (Post 2018982)

Ako već ideš na fractala, mislim da ima boljih hladnjaka od tog zalmana. Tipa venomousX ili Prolimatech Megahalems. H100 je isto super, samo trebaš malo proučit kućište da li stane.

Dottore

07.11.2011. 16:32

Koliko ja vidim polagano postajem razočaran. Naime, ovi bracketi kako kažu proizvođaći ali bez donji dio. Ide direktno na Lotes adapter

npr.
http://motherboardnews.com/wp-conten...socket2011.jpg

i kit gornji dio od Noctue

http://t1.gstatic.com/images?q=tbn:A...juNyQ028-hF7bS

Zado me polagano hvata depra zašto bez donjeg bracketa ( meni je bolji jer dodaje još veći pocršinu hladenja. )

klem	09.11.2011. 18:31

Fan clip za zalman performu cnps10x

trebao bih malu pomoć...dal netko zna di se može nabavit fan clipova za 120mm ventilatore. Fali mi još jedan par za zalman performu :(. Na ebayu ima najjeftiniji scytheovi za 6 $ + još toliko poštarina

Drvoje

09.11.2011. 19:35

Citiraj:

Autor klem (Post 2021561)

Bilo je u "Stinksa" baš Scytheovih za 15kn, a sad ih više nema. Nazovi pa pitaj možda znaju kad dolaze - evo ti i stari link
http://www.links.hr/index.php?option...0.912.103%5D=1
PS Možda i Chipoteka ali nekako sumnjam

Doink the Clown

14.11.2011. 08:06

EVGA Intros LGA2011 Mounting Kit for SuperClock CPU Cooler

Citiraj:

EVGA made its SuperClock CPU fan-heatsink ready for Intel's http://images.intellitxt.com/ast/adT...lass_10x10.gif new "Sandy Bridge-E" socket LGA2011 platform with a mounting kit update that can be purchased separately, as well as could be included in future batches of the product. Carrying the part number M020-00-000234, the LGA2011 mounting kit update for EVGA SuperClock, is priced at US $9.99 on the EVGA store. EVGA released the SuperClock CPU fan-heatsink this May, it is a tower-type fan-heatsink with design based on Swiftech Polaris 120. EVGA's implementation makes use of black fins, heat pipes, and a red LED-illuminated fan. Excluding the LGA2011 mounting kit, the EVGA SuperClock is priced at $55.

http://tpucdn.com/img/11-11-13/65c_thm.jpg http://tpucdn.com/img/11-11-13/65a_thm.jpg http://tpucdn.com/img/11-11-13/65b_thm.jpg

http://www.techpowerup.com/155075/EV...PU-Cooler.html

Dottore

15.11.2011. 10:49

Thermalright LGA 2011 Retention kit Release

Citiraj:

1. For Thermalright’s Silver Arrow/HR-02/Archon/ Venomous and models with the VenomousX BTK
pressure plate kit, we have our minimalist LGA
2011 Adapter Kit with 4 2011 Screw Pillars.

http://www.thermalright.com/data/upl...ge/VX-2011.jpg

Citiraj:

2. For Thermalright’s HR-02 Macho/True Spirit 140/ True Spirit and all models using the new universal
Intel/AMD bracket, we have the new LGA2011
Retention Kit. Comprised of a new 2011 Retention
Bracket and 2011 Screw Pillar Type B.

http://www.thermalright.com/data/upl...ge/MA-2011.jpg

Izvor :sluzbeni link od Thermalright-a

Pupo	15.11.2011. 11:01

Znači da u biti svatko ko ima BTK pressure plate kit može s malo mašte namontirat isti na LGA 2011, samo mu treba malo mašte i par odgovarajućih matica i 4 malo duža šarafa il navojnu šipku da od njih napravi brezone.

Dottore

15.11.2011. 20:37

Noctua Introduces NF-F12 Focused Flow Fan

Možda nije tema za novosti ventilatora ali spada u hlađenje hladnjake tipa high end.

Citiraj:

Noctua today introduced the new NF-F12 120mm Focused Flow fan. Teaming up eleven stator guide vanes with a specially conceived seven blade impeller, the NF-F12’s Focused Flow system creates outstanding static pressure and focuses the airflow for superior performance on heatsinks and radiators. At the same time, a wide range of advanced aerodynamic design measures, second generation SSO-Bearings and Noctua’s new, custom designed PWM IC for fully automatic control guarantee astounding quietness of operation.

http://tpucdn.com/img/11-11-09/41a_thm.jpg http://tpucdn.com/img/11-11-09/41b_thm.jpg http://tpucdn.com/img/11-11-09/41c_thm.jpg http://tpucdn.com/img/11-11-09/41d_thm.jpg http://tpucdn.com/img/11-11-09/41e_thm.jpg

Izvor : techpowerup
Službeni : Noctua

Nudi vrlo visok statički tlak zrak i podržava PWM regulaciju brzine vrtnje putem 4-pinskog konektora. Okretaji, i puno veći tlak u odnosu na NF-P12

Mad_Duke

17.11.2011. 16:18

EDIT: Mod ak može pobrisat, fulao temu! Sorry

Doink the Clown

23.12.2011. 18:50

Zalman's CNPS10X Optima CPU Cooler Goes up for Pre-order

Citiraj:

Announced earlier this month, Zalman's CNPS10X Optima CPU cooler has started to pop up in store listings as a pre-order item. Set for a January arrival, this new tower cooler makes use of Direct Touch Heatpipe (DTH) technology and comes with support for Intel LGA 1155 / 1156 / 1366 / 775 and AMD AMD Socket FM1 / AM3+ / AM3 / AM2+ / AM2 processors.

Zalman's creation measures 132 (L) x 85 (W) x 152 (H) mm, it weights 630 grams, and has four copper heatpipes, aluminum fins, and one 120 mm FSB (Fluid Shield Bearing) fan which features Shark Fin blades (for increased airflow and lower noise & vibration) and operates at 1,000 to 1,700 RPM (sound output is 17 to 28 dBA).

The CNPS10X Optima is bundled with a pinch of ZM-STG2M thermal grease and can be found priced as low as 22.76 Euro.

http://tpucdn.com/img/11-12-23/cnps1...a_b_01_thm.jpg http://tpucdn.com/img/11-12-23/cnps1...a_b_03_thm.jpg http://tpucdn.com/img/11-12-23/cnps1...a_b_05_thm.jpg http://tpucdn.com/img/11-12-23/cnps1...a_b_07_thm.jpg http://tpucdn.com/img/11-12-23/cnps1...a_b_08_thm.jpg

http://www.techpowerup.com/157326/Za...Pre-order.html