To ti je jer koristiš Real Temp. On naprema drugima (Core Temp i ostali) daje ili 5/10°C manje temperature, ovisno, koliko sam skužio o Tjunction-u.

Al on ima jedini realne temperature oko Woldfalea...
Kolko sam čuo.

A napiši onda to čovjeku. Nek pogleda thread na XS-u za Real Temp, pa ako može da popravi onda očitavanja temperaturi. Vjerojatno ne znam za Real temp, jer program nije dugo vani.

Tetedeiench, look at this link below. It shows how temperatures for Intel processors can be wrong with CoreTemp, or similar programmes (which have, as he confirmed with a IR thermometer, wrong TJ max temperature set). On AMD CPUs, everything is OK.
Real temp - for Intel processors @ XS

Just wanted to say great job man; best version of OCCT, temp readings are ok, voltages too, except for 12V, but thats my MB sensor sucky.

Isprika na dva posta, al tek sam sad vidio. Inače gledam s Core Tempom i sad probam ovaj Real Temp i vidim da on pokazuje 5C manje.. Njemu je Tjunction 95, dok je kod Core Tempa 100C. I sad kome vjerovati?

Navodno Real Temp jer taj Tjunction je max. temp, pri kojoj se procesor pregrije i ugasi (a s time i sve ostalo). Čovjek (tvorac Real Temp-a) je mjerio sa Infracrvenim termometrom i dobio da je na nekim procesorima Tjunction manji za 5°C, negdje 10°C.

Upitno je, način mjerenja temperature. Točnije, što je on mjerio sa IR termometrom (a što zapisao kao Tjunction). Gađao je IHS, a po nekim zakonima, jezgra koja predaje toplinu IHS-u, bi morala biti ipak toplija od njega samoga. Jel to 5°C ili 10°C, nitko nezna, no oboje je moguće.

mali update:

OCCT Perestroïka 2.0.0a

MONITORING
* BugFixs : Now OCCT properly detect all 4 cores temperatures on some quad-cores CPU, and OCCT properly detects CPUs in Vista (some were problematic)
* OCCT now supports ACPI Sensors and HDD Sensors (SMART)

TRANSLATION
The "default.po" file used for translation is usable again - it was corrupted in the previous release

Yep, seems that Intel is messing up with TJunction these days.

For people complaining with the +15°C, seems that M0 are reported accuratly by OCCT, one of my beta tester tested it in a very simple way : he swapped a "non M0" with a "M0" stepping, with the very same cooling system. And it seems that only HWmonitor, and thus OCCT, didn't show an exact 15°C difference between the 2 CPU's...

Thanks buddy, nice job :chears:

@edit
naravno i nasim deckima koji su prevodili :chears:

Sve ti je objasnjeno na onoj temi...
Ukratko, oba su uglavnom malo nagađanje, ali ovaj tip je mjerio IC senzorom, pa... Uglavnom, teško mi je vjerovat da su temp 42C u idleu, baš kao E6300 naklokan...

Great application!
I especially like the part with graphs :)
But tell me, will those graphs be available if system freezes during the stress test?

OCCT 2.0.0a Problem
 

Kada pokrenem OCCT 2.0.0a javlja mi se sljedeća poruka:

http://www.max-save.org/images/349498OCCT.JPG

Preveo sam sa francuskog na engleski i to znači:

operation float point invalid

I kada stisnem OK, pojavi mi se ovakav OCCT:

http://pce.hostili.com/images/2h4c9qp1jxt_thumb.jpg

A verzija 1.1.1b radi bez problema. Pomognite ljudi. Komp mi normalno radi, nema nikada nikakvig grešaka ni slično, nakon 12h Dual Primea. Da li da pogledam ako u BIOS-u kakva opcija nije uključena ili isključena?

Mod: slike veće od 50kb, u thumbnail

Meni radi 2.0.0 bez ikakvog problema, ali mi stalno isključuje testiranje u 3 sekundi (odma nakon one minute nadziranja) sa errorom procesor prevruć?
To su izmjerenetemperature, ako je to prevruće onda u k:D
Inače u opcija je uredno postavljena najviša temp od 70:)
I da, senzori su ok;)

New version OCCT adds GPU Stability Test

Upozorenje, to jest beta verzija. Neki napominju (kao i u linku niže) da je čak jači od, u zadnje razvikanog FurMarka. Neki vele da imaju iste temperature.

Uglavnom, ako želite probati - link na beta verziju. Neke slike sa usporedbom sa FurMarkom 1.4 možete naći na ovom linku (Madshrimps)

OCCT Perestroïka 2.0.1 available

Download

Na XS-u je Tetedeiench objavio vijest da je verzija 3 u razvoju i trenutno je dostupna beta :)
Pa, tko želi probati -> XS news - OCCT Perestroika 3.0.0.b05 released

Slika kako će to izgledati u trojci:
http://www.imagesforme.com/out.php/t...OCCT300b05.png

Što je novo:
Najnovija je 3.0.0.b05 koja ispravlja:
Download link na betu:
Direct link

Vuco se baca u extremne vode :D Nabavlja i7, lurka po XS-u, dali je to nagovještaj nove konkurencije? :D

:D

Bez brige momci. S moje strane ne budete imali konkurenciju dok ne završim svoj davno započeti SS :)

Oho, OCCT postaje moćna igračka... :) Svaka čast Tetedeienchu, čovjek očito ne spava...

Znam da je beta, ali može li netko probati OCCT: GPU test ? Mislim, meni se niš ne dešava :)
Prvo idle-a minuti, onda piše starting i to je to. A brijem da bi mi se trebalo pojaviti onaj donut kao u Furmarku ili slično :)

i ja sam to probal jedno 3 minute i ništa se ne dešava.
Temperature ostaju iste.
Ništa jestivog i dlakavog se ne vrti

probao, meni radi ali cini se da to grafa uopce ne detektira kao 3d ili koji vec k jer je vent ostao na defaultu i zagrijala se u 3PM dok si rekao keks.
i da, nije donut niti dlakavo nego ovo

da, gpu mem test mi javlja toliko errora da bi ocekvao da mi graficka uopce ne radi. Nadam se da je rijec o beta problemima jer tesko bi spavao uza sve te errore koje ne mogu reklamirati jer grafa radi potpuno ispravno :D

Zanimljivo.
Na xp-u mi nije radio taj test.
Na visti 64bit radi.
Diglo takt grafi i sve radi kak treba kao da pokrenem furmark

OCCTPT3.0.0.b06
Changelog :

* GPU temp properly recognized and saved
* 64 bits OS detected automatically : if 32 bits : no 64 bits mode (obviously), if 64 bits : 64 bits Linpack & Power supply test by default
* Computers with more than 2GB of memory are now properly recognized with Linpack and Power supply tests - couldn't test with vista64 though
* Adding/removing temps doesn't reset other lines in the monitoring panel
* Custom Sensor 2 name for Voltages is properly saved/loaded.
* Default res is now 1024x768

OCCT 3.0.0 beta 7
Changelog :

* The power supply test now works with Vista64

http://www.yourpicbox.com/images/oGlSqdepB1570.png

Meni zadnja verzija radi sve osim GPU memtesta, ali ljudi moji što ovo zagrijava grafičku LOL
Do sada mi još nije prešla 70°c al na ovom čudu ode na 85°c pa i više, hebesh ti PCS+ i zerotherm, brijem da večeras gore ide dobri stari S1+ 2X120 scythe slipstream.
Doduše zerotherm mi je lockan na nekih 20-30% vrtnje i neželi se brže zavrtit al neda mi se zezat sa servisom, tek sam piknu grafu u komp, prelijen sam opet ostajat bez nje :D

Hey guys, long time no see :D

I came here to warn you about the new beta, but it seems somebody else already did ;) Thanks stasio !

I have to warn you about one thing though (the new version will include a HUGE warning of some sorts) : the power supply test is HARDCORE and could very well mean the death of your power supply.

Tests shows that OCCT Power supply demands 20% to 30% more power than Crysis or 3dmark on dual-cores... and 50% more on quad-cores !

So be warned if you've got a no-name power supply (or "cheap" brands such as LC Power, heden), as OCCT already killed a few of those (they sported a 550W label, they didn't take the test with a dual-core and a HD4850 or such graphic cards). Be warned !

Oh, and there's still something missing with the current version : there're no profile for OCCT GPU at the moment. That means SLI people have to create it manually. Next version should be able to create it automatically for Nvidia, and i have yet to get my hands on an ATI card to get a look into it.

Have fun boys, and thanks for your support !

Great job Tetedeiench, looking forward to the final version :beer:

I want to burn stasio once at least :D

OCCT PT 3.0.0.b08 OUT !

Changelog :

• The EXACT Linpack formula for Problem Size <-> Memory used has been found - OCCT Exclusive ! :) (This caused "no CPU Usage" bugs on this test under Vista)
• OCCT GPU does not force the resolution anymore - It can be run in window, fullscreen mode,...
• OCCT GPU in "error detection" mode now is now multithreaded - the checking algorithm will exec on several CPUs
• If your CPUs cannot check that many frames per second, OCCT GPU will now adapt dynamically its speed, instead of "just at the beginning".
• CPU Usage is now correctly calculated (it was minored in some cases (Linpack mostly)
• CPU Usage in Power Supply mode is now the sum of the CPU Usage of both tests (Linpack and GPU3D, not just Linpack)
• The display is only refreshed once per second, instead of once per 1/4s.
• The Linpack default mode is now Max stress instead of Mid.

Enjoy !

http://www.ocbase.com/download.php?fileext=beta

Keep up the good work :chears:

Nego imam pitanjce.
Pomoću čega ova zadnja verzija occt-a mjeri temp procesora?
Naim NAPOKON sam uspio iskemijat i probit barijeru od 2.9GHz na svom procu, i sad je trenutno bio testiran na 3.0GHz, s tim što me nakon 10 minuta baca van i u logu mi ispiše da je cpu too hot.
Temparatura mi dođe do nekih 56-57 i neide dalje, u occt-u je nariktan shutdown na 80, kako je on doša do te temparature ako ja imam 20 i kusur supnjeva manje??
Komp nije nestabilan, malo sam sad probavao grid i fallout3, sve radi normalno, čak imam i pokoji fps više, ali muči me to.
Temparature pratim sa smartguardianom (inače dfi-jev alat, ali ova ploča je rebrandirani dfi,čak ima i lanparty oznaku na sebi) i pcwizardom i oboje pokazuju identično, u occt-u sam poštelao da mi sa tih istih senzora prikazuje cpu temp.
Probao bih ići dalje sa dizanjem, a neznam šta da radim, neznam jel bi bilo pametno povisit limit u occt-u pa ručno nadgledat temparature preko pcwizarda i guardiana, cooler je zalman cnps 9500, tako da mislim da se nebi smio moći pregirjat obzirom da su voltaže nedirnute.
Testirao sam normalno i linpack modom.

OCCT PT 3.0.0.b10 OUT !

Changelog :

* Linpack test has been updated, and is now much harder on core i7s.
* DirectX 9 version is detected and if not recent enough, the tab is disabled and you've got an error message
* Cuda is detected the same way (but incomplete, as it reports OK on GeForce 7s, and yu need GeForce 8 or more to run it).
* OCCT won't enter the crazy mode anymore if you click the on and off buttons ni a loop
* Core number detection improved (but there's still a bug going on there, sometimes OCCT detects only 3 cores out of 4, 1 instead of 2...)
* Graph size option has disappeared (unused)
* A new option has appeared "Generate graphs", checked by default. Guess what it does if unchecked... it won't generate graphs !
* Due to a few power supply deaths, the Power Supply test bears a warning the first time you click on it.
* The GPU test now works in fullscreen mode with ATI crossfire cards, and the window can be moved to another screen without crashing
* The window position is now saved and restored upon startup.
* The aboutbox now has the correct design
* The bottom of the main form now has the right design (shape, size, color).

http://www.ocbase.com/OpenBeta/OCCTPT3.0.0.b10.zip

@ Diablo
Pa trebalo bi mjeriti sa onime što si odabrao.

Mozete skinuti samo beta 08.
Ima nekih problema sa beta 09 i 10.

Heh,znam i ja da bi trebao, ali iz nekog razloga mi na temp. 20'C nižoj od one koju prikazuje prekida test zbog navodno previsoke temparature proca.
Probat ću danas popodne skinut zadnju verziju pa da vidim hoće li se i na njoj dešavat isto.

Beta 12 Download

Changelog :

* Several graphical glitches were fixed
* the Linpack test is now working again
* The OCCT test has been updated - check it out
* the GPU test now correctly works on Crossfire configurations and SLI config too (SLI needs a profile)
* A few warnings were changed (just made more explicit, really)

OCCT 3.0.0.beta 14

* The linpack test now works with 32 bits OS with more than 2GB of Memory
* OCCT's way of remembering window position as been changed for some people for which it didn't worked

Happy to see that everything is still posted to this board.

I hope i'll be able to reach stable stage by the end of this year, but due to necessary translation delays, i probably won't ;)

Stay tuned though ;)

OCCT 3.0.0 beta 16

Changelog :

* The linpack test is now working again with XP32 with more than 2GB of memory
* the TAB key now works everywhere, and the order has been fixed
* The Temperature line is drawed in front of the CPU Usage line, in the graphs. This leads to better visibility of the graphs.

OCCT 3.0.0 beta 17

Changelog :

* The OCCT Test is now executed in a separate process (this is done to open the way for the "one core not detected" bugfix).
* The OCCT GUI will now report on which core the error occured in the OCCT Test.
* The files "ThreadX.txt" aren't generated anymore (the previous point removes all need for them).
* The way translations are handled is now brand new and much, much more easy to update for me
* If the Linpack test refuses to start, OCCT will now lower the memory utilisation until a successfull start. You may see a small delay in launching the Linpack test, but it is usually less than a second in the worst case.
* The field showing the test duration is now always updated, depending on the test selected. Try to select "custom" and change the duration, you'll quickly see what i mean.

OCCT problem
 

Bok ekipa, evo testirao sam svoj clockani e8500 na 3,8ghz i kad sam ga testirao na OCCT nakon 45min javlja mi se ova poruka, dali je to vezano za moj komp ili za software.

Molim pomoć

Hvala!
http://www.imagesforme.com/show.php/...0107182906.png

Testiraj opet. Ali ovaj put ga ostavi malo dulje (nekoliko sati) . Ako se greška ponovi smanji overclock za 100mhz drugo ništa ne diraj i probaj opet.