ASUS is coming out with several new models on the AMD E market where the Mini-ITX model E45M1-I Deluxe is perhaps the biggest attraction.
ASUS E45M1-M Pro is also in the roadmap, but it uses the bigger Micro-ATX format with less features.

http://www.nordichardware.com/images...nails/e452.jpg

The major different between the two is the processor, or more precisely the APU. AMD E-450 sports dual cores (Bobcat), but this time clocked at 1.65 GHz - up from 1.6 GHz in E-350. The biggest change comes on the GPU where the nominal frequency has been bumped to 508 MHz, but where AMD Turbo Core adds another boost to 600 MHz when needed. Something that together with faster DDR3-1333 memory will enable up to 30% better performance than the precursor. Other noteworthy features include support for Stereopscopic 3D (Blu-ray 3D and more) and DisplayPort++ that support audio and video through a HDMI adapter.

Izvor

AMD 1090FX i 1070 Chipset

In 2012, AMD chipset family will be led by the 10-series chipset. At the very top is AMD 1090FX northbridge, followed by 1070. 1090FX will be designed to give out two PCI-Express x16 links, which can then drive up to four graphics cards. The 1070, on the other hand, gives out just one x16 link, which can drive up to two graphics cards. AMD will scrap its present model of 990X and 970, in which the northbridge is essentially the same piece of silicon, with the 990X having lane switches and supporting CrossFireX. A big revelation here is that the 10-series chipset will not feature PCI Express Gen 3.0. We'd normally expect AMD to be at the forefront of supporting new technologies. If we remember, AMD 790FX was the first AMD platform chipset in the industry to feature PCI-Express 2.0. Also, it is highly likely that AMD's Radeon HD 7000 series graphics, which are slated for later this year, will support PCI-Express 3.0 interface.

http://www.pohrani.com/f/3E/4b/3ecZeFhO/34a.jpg

On the upside, though, 10-series chipset will be backed by the new SB1050 southbridge, which outpaces Intel's 7-series chipset in terms of connectivity. To begin with, SB1050 will pack a massive 8-port SATA 6 Gb/s RAID controller. All ports will run support 6 Gb/s data-rate. The SB1050 will also integrate native USB 3.0 SuperSpeed controllers. They will also streamline inventory management for manufacturers, as the chipset will be compatible with existing processor platforms. Some industry sources we spoke to commented that PCI-Express 3.0 chipset support is unlikely till Piledriver processors start selling.

Izvor: techPowerUp

Usporedba socketa: FM1 vs. FM2

Here is the first picture of AMD accelerated processing units in the existing FM1 package and future FM2 package on which the next-generation Trinity APU will be based on. Both packages are very similar, follow AMD's favourite yet archaic PGA design. The pins are physically arranged in a mostly similar fashion, though we don't have a pin map at hand. The difference comes with some of the blanked pins in the sub-central portion of the pin array. The FM2 package has 904 pins, compared to 905 on FM1. One pin is blanked, while a pair of blanked pins are arranged further away from the central cutout. This makes FM1 and FM2 clearly incompatible. Neither will you be able to use today's A-Series APUs in the FM1 package on future socket FM2 motherboards, nor will you be able to run future FM2 APUs on today's FM1 motherboards. Yet, AMD will port the A75 FCH chipset to the next-generation "Virgo" platform. The FCH or Fusion Controller Hub, like Intel's PCH (Platform Controller Hub), is not much more than a glorified southbridge, and is portable between Fusion platforms as it's essentially a PCI-Express 2.0 x4 device. In the picture below, "Llano" FM1 APU is on the left, and "Trinity" FM2 on the right.

http://www.pohrani.com/f/p/pF/3e9HqYnx/67a.jpg

Izvor: techPowerUp